N26704 280w multi sander instruction manual after sales support tel: 1300 922 271 email: service.Australia@einhell.Com model number rt-xs 28.
Multi sander what your 1 year warranty means great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first 1 year after the date of purch...
3 after sales support tel: 1300 922 271 email: service.Australia@einhell.Com 1 2 3 1 2 4 9 10 11 7 a b c 10 a 5 1 5 3 6 8.
4 after sales support tel: 1300 922 271 email: service.Australia@einhell.Com 5 7 6 8 4 9 1 11 c a b e 6 d 8 d 7 a 6 a b 6 a 9 i 0 2 + - 3.
5 after sales support tel: 1300 922 271 email: service.Australia@einhell.Com general safety rules save these instructions 1. Work area a. Keep work area clean and well lit. Cluttered and dark areas invite accidents. B. Do not operate power tools in explosive atmospheres, such as in the presence of f...
6 after sales support tel: 1300 922 271 email: service.Australia@einhell.Com important! When using equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is ...
7 after sales support tel: 1300 922 271 email: service.Australia@einhell.Com 15. Always remove keys and wrenches after use. Before switching on, make sure that all keys and wrenches have been removed from the tool. 16. Avoid unsupervised operation. Never carry mains-powered tools with your finger on...
8 after sales support tel: 1300 922 271 email: service.Australia@einhell.Com keep the noise emissions and vibrations to a minimum. • only use appliances which are in perfect working order. • service and clean the appliance regularly. • adapt your working style to suit the appliance. • do not overloa...
9 after sales support tel: 1300 922 271 email: service.Australia@einhell.Com • place the rectangular sanding/grinding plate (6) together with the fitted sanding/ grinding paper (a) onto the punch (9) for the sanding/grinding paper). (fig. 8) • now punch the required holes into the sanding/grinding p...
10 after sales support tel: 1300 922 271 email: service.Australia@einhell.Com 6.3 working with the equipment: important. Never hold the workpiece you wish to sand/grind in your hand. Secure the workpiece on a sturdy surface or with a vise. • place the whole surface area of the sanding disk on the ma...
11 after sales support tel: 1300 922 271 email: service.Australia@einhell.Com.
M after sales support tel: 1300 922 271 email: service.Australia@einhell.Com 06/2011 art.Nr: 44.191.33_11010