Tayama TO-2000A Instructions Manual - page 2
Important Safety Instructions
These basic safety precautions should always be followed:
1.
Read all instructions before using the halogen oven.
2.
DO NOT touch hot surfaces. The temperature of the outer surface
can get very hot while the halogen oven is in operation. Always use
gloves when handling hot materials and allow metal parts to cool
before cleaning. Allow the unit to cool thoroughly before putting in
or taking out parts. Always use the handles when moving the unit.
3.
DO NOT use the halogen oven for other than its intended use.
4.
Before turning on, ensure the electrical voltage and frequency of the
circuit corresponds to those indicated on the rating label of the
appliance.
5.
To protect against the risk of electric shock, do not immerse this
halogen oven, cord set or plug in water or any other liquids.
6.
The halogen oven is not intended to be operated by means of an
external timer or any type of separate remote control system.
7.
The use of attachments which are not recommended or sold by the
manufacturer may cause fire, electric shock or injury.
8.
This appliance is designed for indoor use only. DO NOT use
outdoors.
9.
DO NOT use an extension cord unless completely necessary with
this product. If an extension cord is used please ensure that it has a
rating equal or exceeding the rating of this appliance.
10.
DO NOT pull or carry by cord, use cord as a handle, close a door on
the cord, or pull cord around sharp edges or corners. Keep cord away
from heated surfaces.
11.
DO NOT bend or damage the power cord.
12.
Always unplug the halogen oven when not in use. To disconnect
from the power supply, grip the plug and pull from the power socket.
Never pull by the cord. The power plug must be removed from the
power socket before cleaning, servicing, maintenance or moving the
halogen oven.
13.
Never force the plug into an outlet.
14.
DO NOT place the appliance near a hot gas or electric burner.