Taylor 390 Service Manual

4.8 BEVERAGE EQUIPMENT:   

4.8.6.3 Iced Cappuccino Machine 

1 

Issue Date: February 21, 2008 

Taylor 390 

Last Modified: October 31, 2008 

 4.8.6.3 ICED CAPPUCCINO MACHINE  

Taylor MODEL: 390 

LOCATION:  

Front of House 

WHEN CLEANED: 

Daily, Weekly, Monthly, Seasonal 

TOOLS/SUPPLIES REQUIRED: 

• Salmon 

Cloth 

•  2 or 3-Compartment Sink 

• Sink 

Detergent 

• Sanitizer 

•  Food Grade Lubricant (Taylor Lube or Dow Corning 111) 

•  2 Clean, Sanitized Pails (one for product, one for cleaning) 

• Paper 

Towel 

• Cleaning 

Brushes 

•  O-Ring Remover  

•  Iced Cappuccino Parts Tray  

•  C-Safe Circuit Breaker Lockout Kit 

O-Ring Remover Tool – 

TDL Tune-Up Kit #78116 

Double Ended – TDL Kit #71092 

Use on All O-Rings, All Holes in Metal Parts, O-Ring 

Grooves on All Parts, Core in Draw Valve, Prime Plug Port 

Hole in Freezer Door, Retaining Pin, Door Stud Nuts. 

White Bristle – TDL Kit #71092  

Use on Product Entry Ports in 

back of Freezer Door, Scraper 

Blade, Draw Handle, Drive 

Shaft, Drive Shaft Seal 

White Bristle (Gong Brush) – TDL #71091 

Use on Hopper, Parts Tray, Rear Drip Pan, Beater, 

Front Bearing, Front Drip Tray, Freezing Cylinder 

Black Bristle – TDL Kit #71092 

Use on Rear Shell Bearing