TC Electronic ND-I NOVA DELAY User Manual - Delay Spill-Over

14

Delay Spill-over

The Nova Delay features true delay spill-over. With true

delay spill-over, delay repeats will continue when

changing to manual or preset mode, when changing to

a different preset and also when going to bypass mode.

This feature gives numerous musical possibilities. As

an example you may switch from a long delay with a

high level of feedback to a short slap-back type and still

hear the long delay repeats ring out across your new

delay setting.

Delay spill-over can be set individually for manual

mode and for all individual presets:

•

Select manual or preset mode.

•

If preset mode is selected, then recall the preset for

which you would like to enable or disable delay

spill-over.

•

Press and hold “MOD STYLE” to toggle between

delay spill-over modes.

- In delay spill-over mode - LEDs 1, 2 and 3 will

flash slowly one at a time.

- In delay mute mode (no spill-over) - LEDs 1, 2

and 3 will rapidly flash one time each.

These indications are also given when changing

between manual and preset modes.

DELAY SPILL-OVER

To mute the outputs of the Nova pedal while

calibrating you can press and hold the TAP

TEMPO switch.