TC Electronic ND-I NOVA DELAY User Manual - Tap Tempo Modes

Tap Tempo Modes

The Nova Delay always has one global tempo. This

tempo is either tapped in via the TAP TEMPO switch,

audio tap or dialed in via the DELAY knob. 

Manual mode

In manual mode it is always the global tempo that

applies. 

Preset mode

When switching from manual mode to preset mode

you can set up whether it is the delay time stored in

the preset or the global tempo, that should apply.

As explained earlier the actual delay time also

depends on the selected sub-division.

To switch between using the stored delay time or the

global tempo when entering preset mode:

•

Go to preset mode by pressing PRESET.

•

Press and hold “TYPE” for 1 second.

- Steady PRESET key LED indicates that you are

using the global tempo.

- Flashing PRESET key LED indicates that you are

using the stored delay time.

Cool Features via ON/OFF and

TAP TEMPO  switches

Tap tempo and on/off are the main functions assigned

to the ON/OFF and TAP/TEMPO switches. However,

several other features can be accessed using these

switches thus giving you even more control at the tip of

your feet.

See current preset number

What is the current preset-number? As explained

earlier you can press the PRESET button to see the

current preset number. You can also see the current

preset number following this procedure:

•

Press TAP TEMPO once immediately followed by

pressing the ON/OFF switch.

ADDITIONAL FEATURES

15