Quick start guide cjb1j10l caad.
2 device moveband led display note: • ensure that the strap is kept clean. Contact with contaminants, such as dust and dye, can cause stains on the strap that may not be able to be fully removed..
3 getting started charging the battery: charge the battery before using it for the first time or when it has been unused for extended periods. 1. Pull the strap away from your moveband device. 2. Take out the charger dock and ensure that the pins in the charging dock are aligned with the pins on the...
4 3. Place the moveband on the charger dock with the charging terminals facing each other. Once connected, the led will keep lighting. 4. After fully charging your moveband, disconnect it from the charger dock. Unplug the charger from the electric socket or computer. Notes: • use only tcl communicat...
5 wearing the moveband open the clasp and place moveband around your wrist. Fit the strap to your wrist and then insert the pin into an adjustment hole. Notes: • do not bend the strap excessively. Doing so may damage the device. • optional straps are available for your preference..
6 pairing with your phone step 1: installing the tcl moveband app. You can download and install the tcl moveband app in the following ways: • search “tcl moveband” in the google play store (for android). • search “tcl moveband” in the app store (for ios). • scan the following qr code. Step 2: connec...
7 when moveband is successfully connected with phone via bluetooth, the led will light up. Monitoring your fitness activities: • set your fitness goal on the tcl moveband app. • you can view your fitness data on the tcl moveband app. Note: when you achieve a fitness goal, your moveband will vibrate ...
8 music control • face your palm down and keep still for 1s. Flip twice to start/pause the music. • face your palm down and keep still for 1s. Flip once and back again to play the next song. Camera control • face your palm down and keep still for 1s. Flip twice to start the camera. • face your palm ...
9 led status: tap your wristband twice to check the battery status. Charging process led description 100% 3 led stays on constantly 67–99 % the first two leds stay on constantly, the third flashes. 33–67 % the first led stays on constantly, the second flashes. 0–33 % the first led flashs led low bat...
10 level led description 5% the first led flashes 3 times and vibrates. More information for more information, please refer to the online help in the tcl moveband app or www.Tclcom.Com/wearables/..
