TDK DA9000 User Manual - page 12
7. Press ENTER.
•
The DA-9000 will check the disc for available capacity.
8. With BURN highlighted, press ENTER to begin burning.
•
After the disc has been burned, the CD tray will open automatically.
To record MP3 tracks from the DA-9000’s hard drive to an MP3 CD:
1. Load a blank Audio CD-R or Audio CD-RW into the DA-9000.
2. In the Main Menu, select HDD (ARTIST) or HDD (ALBUM).
3. Press ENTER to open the artists list or albums list.
4. Select the desired artist or album.
5. Press BURN CD.
•
You will be prompted to select the type of CD to be burned.
6. Select DATA CD.
7. Press ENTER.
•
The DA-9000 will check the disc for available capacity.
8. With BURN highlighted, press ENTER.
•
After the disc has been burned, the CD tray will open automatically.
8
DA 9000: USER MANUAL
NOTE: It is not possible to burn non-compressed tracks (such as WAV files) onto
an MP3 CD from the DA-9000’s hard drive.
NOTE: After audio tracks have been recorded, the CD will
automatically be finalized. After finalization, it will not
be possible to add additional tracks.
To rip (transfer) specific tracks from an MP3 CD to the DA-9000’s internal hard drive:
1. In the Main Menu, select CD.
2. Press ENTER.
3. Select a folder that contains the desired track(s) and press ENTER.
4. Select a desired track and press MARK.
•
Repeat until all desired tracks have been marked.
•
Marked tracks will have a dot [•] after the title.
5. Press PROG.
6. Press REC.
7. Select the desired recording option.
8. Press REC. to begin ripping the tracks to the internal hard drive
To record from an external source to the DA-9000’s internal hard drive:
1. Connect the audio source device to the DA-9000’s audio inputs.
2. In the Main Menu, select LINE IN.
3. Press REC.
4. Select COMPRESS BIT RATE.
5. Press REC. to begin recording the external source.
BURNING TO CD-R OR CD-RW FROM THE INTERNAL HARD DRIVE
Only discs bearing the CD-R Digital Audio or CD-RW Digital Audio logo (see examples
below) can be burned by the DA-9000. CD-R and CD-RW discs designed for computer use
can’t be burned by the DA-9000.
To record audio tracks from the DA-9000’s hard drive to a CD:
1. Load a blank Audio CD-R or Audio CD-RW into the DA-9000.
2. In the Main Menu, select HDD (ARTIST) or HDD (ALBUM).
3. Press ENTER to open the artists list or albums list.
4. Select the desired artist or album.
5. Press BURN CD.
•
You will be prompted to select the type of CD to be burned.
6. Select AUDIO CD.
NOTE: DA-9000’s Auto Track Detection will automatically insert tracks
between music.
NOTE: The DA-9000 features Auto Track Detection. This allows the unit to
automatically create a new track on the CD that’s being recorded when a new
track starts on the source CD.
NOTE: Both MP3 and Audio tracks can be burned as an
Audio CD. DA-9000 will temporally decompress MP3
tracks for burning.
NOTE: After MP3 tracks have been recorded, the CD will remain open, allowing
additional tracks to be added in new recording sessions.