TDK mojo 128F User Manual - page 13
8. In the right side of the top bottom half of the window, click the file(s) you would like to transfer to your
hard drive.
• To choose multiple files, hold down the CONTROL (CTRL) key while clicking the file names.
9. Click the UPLOAD icon to move the selected file(s) from MOJO to the desired folder on your hard drive.
• A confirmation dialog box will appear. Click YES.
10.The files will begin transferring to the hard drive. You can click the CANCEL button at any time to abort
the file transfer.
• Repeat the above steps as necessary, until you’ve copied all the desired recordings from MOJO to
your hard drive.
11. Once all the desired recordings have been copied, you can delete the recordings from MOJO by following
the “To delete tracks from MOJO with the UniFi Software” instructions section of this document.
12.Once you have completed uploading the files, detach MOJO from the USB cable.
M P 3 M O D E S E T U P M E N U
The MP3 mode setup menu allows you to customize and tweak MOJO to your tastes and preferences. Note that the
MP3 mode setup menu and the FM mode setup menu (described later in this document) offer different options.
Here’s a rundown of the MP3 mode setup menu icons:
To access MOJO’s MP3 mode setup menu:
1. Enter the setup menu by holding down NAV while in MP3 playback mode.
• The LCD screen will display the icons of the setup menu.
2. By pressing REWIND or FAST FORWARD, navigate through the setup menu icons.
Press NAV to enter the sub-menu of the desired function.
3. To automatically exit the setup menu, don't click or navigate for approximately 3 seconds.
25
2. Navigate to the MOJO RECORD folder in the root directory.
• All your previously recorded FM files and voice memos are contained in the folder.
3. By pressing REWIND or FAST FORWARD, highlight the desired file and press
the PLAY/PAUSE button. Voice memo playback and navigation is handled in the same way as MP3 file
playback and navigation.
To transfer FM/voice recordings to your PC:
1. Make sure MOJO is powered on.
2. Using the USB cable, connect MOJO to your computer.
• The USB CONNECTED message should display on the unit's LCD screen once the cable is connected.
3. Start the TDK UniFi software.
• The top half of the window shows the files and folders on your computer's hard drive. The bottom half
of the window shows the files and folders currently stored on MOJO.
4. In the left side of the top half of the window, navigate to the desired destination folder on your hard drive
to which you would like to transfer the recording(s) that are currently located on your MOJO.
NOTE: Click on the plus icon to the left of the folder to view subfolders within it.
5. Click on the desired destination folder to which you'd like to add the recording(s).
• The folder’s current contents (if any) will be displayed on the upper right portion of the window.
6. In the bottom half of the window, click the ALL MEMORY button to see all the files available on your MOJO.
7. Double-click the MOJO RECORD folder.
• All the FM and voice recording files currently on MOJO will be displayed.
2 4
EQUALIZER
REPEAT
FOLDER
NAVIGATION
ERASE
LANGUAGE
SYSTEM
RETURN
TDK.087.03_Mojo128_256_UGv1 10/10/03 10:15 AM Page 24