TDK Sound Cube User Manual - Operation (Continued)
15
OPERATION (CONTINUED)
To use the LINE IN Jack: Insert one
end of an audio cable into the
AUX/LINE OUT jack on your external
audio unit and the other end into the
LINE IN jack on the rear of this unit.
2a
To use the RCA IN Jacks: Connect a
left and right audio cable from the
Left/Right jacks of your external unit to
the RCA IN Left/Right jacks on the rear
of this unit.
2b
USING AN EXTERNAL UNIT CONNECTED TO THE LINE IN OR RCA JACKS
Turn this unit on by rotating the
Volume/Power control until a click is
heard and the Power indicator lights to
turn the unit on.
SOURCE EQ
1
Press the Source button/indicator 1;
the Source menu will appear in the
display. Select AUX1 (if using LINE IN
Jacks) or AUX2 (if using the RCA IN
jacks) using the Select control 2, and
then press the OK button 3 to confirm.
Start playback of the external device.
Adjust the Volume and EQ as
described on page 7.
SOURCE EQ
1 2 3 4 5
O ®p n
1
2
3
3
NOTE:
Refer to the owner’s manual of the external unit for detailed connection instructions.