TE Energy 2510B User's Operating Instruction And Installation Manual - page 15
Energy 2510 B
Vers. 022
15
GB
4.12 Connecting an additional silencer
To further reduce the generating set operating
noise, an (optional) additional silencer can be
installed externally.
The additional silencer kit code 02482 consists
of:
• A silencer code 02019 (Fig.21 Ref.1).
• A one-metre long section of flexible steel
tubing code 00433 (Fig.21 Ref.2).
• Two connection fastening clamps code 00543
(Fig.21 Ref.3).
• One hose coupling code 03645 (Fig.21 Ref.
4).
To connect the silencer to the generating set, first
of all remove the door (Fig.22 Ref.2) by using the
special key (Fig.22 Ref.1) and the muffler guard
(Fig.22 Ref.3).
Now remove all the flame trap parts (Fig.23 Ref.
2 – 3 – 4 – 5) from the muffler (Fig.23 Ref. 1).
After introducing the coupling code 03645 (Fig.
24 Ref. 2) into the muffler terminal (Fig.24 Ref.