TE Energy 2510B User's Operating Instruction And Installation Manual - page 16
of
40
Energy 2510 B
Vers. 001
GB
16
1), drill a small hole in the muffler terminal - large
enough to accept a self-tapping screw to lock the
muffler terminal (Fig.25 Ref. 2).
Now insert the hose code 00433 (Fig.25 Ref. 5)
on the coupling (Fig.25 Ref. 3).
Lock the hose with the clamp code 00543 (Fig.
25 Ref. 4).
Fix the flexible hose (Fig.26 Ref.2) to the silencer
terminal on the inlet side (Fig.26 Ref.1) by using
the other supplied clamp (Fig.26 Ref.3).
Replace the flame trap parts (Fig.27 Ref. 2 – 3 –
4 – 5) on the silencer terminal and, by using the