Teac CR-H500 Owner's Manual - Recording to Usb
28
Recording to USB
You can record a source of radio broadcast and external
device to the external USB storage device as MP3 files.
1
Connect the external USB storage device to the
USB port of the CR-H500NT.
2
Select a source to be recorded.
3
Press the RECORD button.
Recording starts.
there is no free space or the device is locked.
To stop recording
Press the stop button (
H).
Before Recording
CAUTION
recording.
Do not disconnect the power cord during recording.
It may cause damage to the products.
suitable level before recording. If not, the recording
quality becomes poor.
Note
sequence like “Audio001.MP3”, “Audio002.MP3”, …….
For Example:
If there are “Audio004.MP3” and “Audio009.MP3” files
in the AUDIO folder, and you make a recording, a new
file will be “Audio010.MP3”.
USB storage device using your PC.
You cannot check the remaining memory capacity
with this unit.
and new file is created when the time exceeds 90
minutes. When a new file is created, recording will
pause for a few second.
converted to a MP3 file at a bit rate of 128 kbps.
EN_CR-H500NT_T_C.indb 28
09.10.6 5:31:34 PM