Teac GF-350 Quick-start Recording Manual

If the PHONO indicator doesn’t

appear in the display, press the

PHONO/AUX button once or

twice to select PHONO.

2

This Guide provides you with the simplest way to use this equipment for recording.

Of course, we strongly suggest that you consult the Owner's Manual for complete details and important safety information.

Z

Press the RECORD button.

The red indicator on the RECORD

button lights.

The unit enters record pause mode.

In record pause mode, “REC”

indicator blinks and the J indicator

lights on the display.

5

Press the POWER switch to turn

the unit on.

1

Load a recordable CD-R or CD-RW

disc into the unit. 

3

Place the record on the turntable.

Before use, completely loosen the

transportation screw by turning it

clockwise with a coin and remove the

stylus guard.

1. Select the proper speed.

2. Gently push the clamper to the right

to release the tone arm.

4

Gently lower the tone arm onto

the edge of the record (or the

track to be recorded).

When the turntable is stopped, the

PLAY or the PAUSE buttons will not

work and you cannot start recording.

6

Press the PLAY or the PAUSE button

to start recording.

When the rotation of the turntable

stops, the recording will stop

automatically.

To prevent unwanted noise from the

tone arm being recorded, stop the

recording manually by using the STOP

button.

7

TEAC CORPORATION  0307. MA-0955C

CEC6P12013600-C

Quick-Start Recording Guide

GF-350

Manual track division

It is possible to divide the recording into tracks while recording.

While the recording is taking place, press the TRACK INCREMENT

button. The current track number will be incremented by one.

About CD-R/CD-RW discs

Please use CD-R and CD-RW discs bearing the “DIGITAL AUDIO”

mark. This unit CANNOT RECORD CD-R and CD-RW discs

designed for computer systems.