Teac GF-450K7 Owner's Manual - Before Recording
Listening to a Cassette Tape 2
22
To stop fast-forwarding or rewinding, press the Stop button.
When a tape is fast-forwarded or rewound to the end, make
sure to press the Stop button to stop the function.
Never press the Play button (y) and Rewind button (m)
at the same time.
A
To stop playback
Press the Stop button during playback to stop.
B
To suspend playback temporarily
Press the Pause button to suspend playback temporarily. Press
the button again to play again.
C
Fast-forwarding/rewinding
Press the Fast-forward or Rewind button (,/m) to fast-
forward or rewind a tape respectively.
Before Recording
Before you start recording, make sure that you understand
the following points:
recording. Computer CD-R or CD-RW discs do not work with this
unit.
erased from it.
finalized, a CD-R disc is “fixed” and behaves in the same way as a
CD. Finalized CD-RW discs, however, can be unfinalized, erased
and re-recorded.
four seconds in length, and there can be a maximum of 99 tracks
on an audio CD.
seconds from the beginning of a track, the unit continues to
record no signal and stops when the track’s length reaches four
seconds.
few seconds, and the unit then goes into stop mode. Do not
apply shock or vibration to the unit during recording.
fade-out over a few seconds.
When the fade-out has finished, the unit finalizes the disc
automatically and stops.
unit finalizes the disc automatically and stops.
one.
Serial Copy Management System
This unit is in compliance with the Serial Copy Management
System standard. This standard has been established to restrict
digital-to-digital copying to only the first generation. The basic
rules governing this system are as follows:
Rule 1
A digital recording is possible from a digital source such as a CD,
DAT or MD onto a recordable CD-R, CD-RW, MD or DAT through
a digital input connection. However, further digital to- digital
recording is prohibited for the second and later generations.
Rule 2
When an analog source such as an analog disc or FM broadcast
is digitally recorded by using a CD-R, CD-RW, MD or DAT, this
recorded source can be digitally recorded on another CD-R, CD-
RW, MD or DAT. However, further digital copying is prohibited.
B
A
C