Teac LE55AE1UHD User Manual - Menu Operation
Menu Operation
Picture Menu
Press the MENU button to display the main menu.
Press the ◄/► button to select PICTURE in the main menu.
1.Press the ▼/▲ buttons to select the desired option in
the PICTURE menu.
2.Press the OK button to adjust.
3.After finishing your adjustment, press the MENU
button to save and return back to the previous menu.
Picture Mode
Press ▼/▲ to select Picture Mode, then press OK to
enter the sub-menu.
You can change the value of contrast, brightness,
color,sharpness and tint when the picture is in Personal
mode.
Contrast/Brightness/Color/Tint/Sharpness
Press▼/▲ to select a desired option, then press ◄/►
to adjust.
Contrast: Adjust the highlight intensity of the picture.
Brightness: Adjust the optical fiber output of the entire
picture, it will effect the dark region of the picture.
Color: Adjust the saturation of the color.
Tint :Use in compensating color changed with the
transmission in the NTSC code.
Sharpness: Adjust the peaking in the detail of the
picture.
NOTE: Switch personal picture mode before adjusting
the Contrast, Brightness, etc.
Color Temp
Change the overall color cast of the picture.
Press ▼/▲ to select Color Temperature, then press OK
to enter the sub-menu.
Press ◄/► to select (Available Picture modes Cold,
Normal, Warm).
Noise Reduction
To filter out and reduce the image noise, and improve
picture quality.
Press ▼/▲ to select Noise Reduction, then press OK
to enter the sub-menu.
Off : Select to turn off video noise detection
Low : Detect and reduce low video noise.
Middle : Detect and reduce moderate video noise.
High : Detect and reduce enhanced video noise.
Default : Set as Default.
HDMI Mode
Press ▼/▲ button to select HDMI Mode, then press
OK button to confirm.
Backlight
Adjust the backlight for energy saving.
16