Teac LE55AE1UHD User Manual - Attaching The Stand
Wall mounting assembly instruction
Attaching the stand
Follow the instructions below to remove the base of the TV:
1.Place the unit (face down) on a soft surface.
2.Loosen and remove the 6 screws securing the stand to the TV.
3.Gently remove the stand.
4.To reinstall the stand, place the unit (face down) on a soft surface and reverse the above instructions.
NOTE: Make sure the power is completely disconnected and unplugged before starting. when handling the TV, never press
or pinch on the fragile screen.
Wall-mounting the device
If you are mounting the device, please consult a qualified installer for further instructions on bracket support and
wall support.
Mounting Specification: 200mm×200mm using screw size M6 (not supplied). Length of screw should not
exceed 10mm.
Please Note: The 10mm length of screw refers to how deep the screw can go inside the mounting holes.
When you're buying screws, you should add the original 10mm to the thickness of your mounting plate in
order to get the total screw length.
200mm
200mm
5