Teac LP-R400 Quick-start Recording Manual

Z

LP-R400

Quick-Start Recording

This Guide provides you with the simplest way to use this

equipment for recording.

Of course, we strongly suggest that you consult the Owner's

Manual for complete details and important safety information.

If the PHONO indicator doesn’t

appear in the display, press the

PHONO/AUX button once or

twice to select PHONO.

2

Press the RECORD button.

The red indicator on the RECORD

button lights.

The “REC” and J indicators on the

display will light, and the unit enters

record pause mode.

5

Press the POWER switch to turn

the unit on.

1

Load a recordable CD-R or CD-RW

disc into the unit. 

3

Place the record on the turntable.

Before use, completely loosen the

transportation screw by turning it

clockwise with a coin and remove the

stylus guard.

1. Select the proper speed.

2. Gently push the clamper to the right

to release the tone arm.

4

Gently lower the tone arm onto

the edge of the record (or the

track to be recorded).

When the turntable is stopped, the

PLAY or the PAUSE buttons will not

work and you cannot start recording.

6

Press the PLAY or the PAUSE button

to start recording.

When the rotation of the turntable

stops, the recording will stop

automatically.

To prevent unwanted noise from the

tone arm being recorded, stop the

recording manually by using the STOP

button.

7

Manual track division

It is possible to divide the recording into tracks while recording.

While the recording is taking place, press the TRACK INCREMENT

button. The current track number will be incremented by one.

TEAC CORPORATION

1107. MA-1298A

CEC6P12014700