Teac PC-D910i Owner's Manual - page 7
7
CD PLAYER
CD Player
Playing a CD
This CD-player can play Audio discs,CD-R, and
CD Rewritables. Do not try to play CD-ROM,
CD-ROM,CDI,VCD,DVD or computer CD.
1 Adjust the FUNCTION selector to CD.
→
Display: shows﹍Briefly.
2 To open the CD door, press the CD door at
the edge marked
OPEN.
3 Insert a CD,CD-R or CD-RW with the printed
side facing up and press the CD door gently
to close it.
4 Press
PLAY/PAUSE on the set to start
playback.
5 To pause playback press
PLAY/PAUSE.
To resume, press
PLAY/PAUSE again.
6 To stop CD playback, press
STOP.
Selecting a different track
During playback you can use or
to select a
Particular track..
If you have selected a track number in the stop
or pause position, press
PLAY/PAUSE to start
playback.
Press
once briefly for the next track, or
press repeatedly until the desired track number
appears on the display.
Press more than once briefly for a previous
track.
REPEAT MODE:
REPEAT-plays the current track continuously
REPEAT ALL-plays the entire CD continuously
·
Press REPEAT button repeatedly to through
the repeat mode listed below
REPEAT 1﹥REPEAT ALL﹥NORMAL
Programming track numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more than
once.
1 In the
STOP mode, press PROG. button
-the display shows“01”and“PROG.”briefly.
2 Press or
for your desired track.
3 Press
PROG. button to store the track
4 Repeat steps 1 to 3 to store all desired
tracks in this way.
5 To play your program, press
PLAY/PAUSE.
Reviewing your set program
In the stop mode, press
or
,the display
will show you stored tracks.
Erasing a program
You can erase the contents of the
-Opening the CD door;
-Selecting other source;
-Press
STOP button twice