Teac PL-D1400 Owner's Manual - page 19
15
TUNER
FUNCTON
Press FUNCTION button.
The button is used to switch between
DVD mode, AV mode, and TUNE mode.
E
When in TUNE mode, you can search
stations automatically or manually,
then save the channels if necessary.
FM/AM
The FM/AM button is used to switch between
FM band and AM.For FM station,afrequency
range of 87.50 MHz~108.00 MHz is provided.
So when switched to FM station, the VFD will
display 87.5MHz first. The frequency of AM
ranges from 522 KHz to 1620 KHz.So when
switched to AM,the VFD will display 522 KHz
first.
TUNING- TUNING+
Press TUNING- and TUNING+ button to
a search a station once,when a broa-
station searched,the player will
begin to broascast. Then you can
you d love to. TUNING+ is used
towards higher frequency band.
TUNING- goes toward the
“
”
“
”
auto
dcasting
stop and
save it if
“
”
to search
And the“
”
opposite side.
AUTO
Press the AUTO button to search all available
radio stations.When a station is found it will
be automatically saved.This will continue
until all the available stations have been
memorised.
E
During auto-searching,most buttons on
the remote control will stop the auto tuning.
ENTER
FINE-
FINE+
The FINE- and FINE+ button is used to
manually search a station, the step is
50 Khz for FM band, and 9 KHz for AM.
FINE+key is used to manually search
towards higher frequency range. And
FINE- used towards lower freuency
range.
“
”
SETUP/MEM
To save a channel, press SETUP/MEM
first,now the VFD will display MEM ,
then input a register number that you
to save the station to,Pressing
SETUP/MEM key a second time will
save the current station to the register
you appointed.
“
”
want
the
E
There are 40 preset memory stations
available,20 FM and 20 AM.
CH- CH+
By using CH- and CH+ key or directly
input the number you have saved a
station to ,you can select a specific
station you like.
For a empty station, the default frequency
is 87.5MHz for FM, and 552 KHz for AM.
FUNCTION BUTTON
’