Teac SR-L200i Owner's Manual - page 7
Setting the Clock
CLOCK
ADJ
MULTI JOG TIMER ON
1
Press and hold the CLOCK ADJ button
for more than 3 seconds and release
it when the time display starts
blinking.
seconds, the time setting mode will be
cancelled.
2
If you want to change the hour
mode, press the TIMER ON button to
select 24 or 12 hour mode.
The default setting is 24-hour.
3
Turn the MULTI JOG rotary knob to
adjust the clock, and then press the
CLOCK ADJ button.
The clock starts from 00 second.
4
Turn the MULTI JOG rotary knob to
select Year, and then press the
CLOCK ADJ button.
5
Turn the MULTI JOG rotary knob to
select Date, and then press the
CLOCK ADJ button.
power supply for more than 30 seconds,
the settings kept in memory (clock,
preset stations, timer setting) will be
erased.
DST (Daylight Saving Time)
Select ON to put the clock one hour
ahead. Select OFF to turn the DST off.
3
1
2
Basic Operation 1
1
Press the STANDBY/ON switch to
turn the unit on.
was last selected.
AUX button (or the Play/Pause button of
the remote control unit) to turn the unit
on.
2
Press the iPod, TUNER or AUX button
to select a source.
The source button pressed will light.
to the AUX IN jack, press the AUX
button.
iPod is docked, the iPod button and the
iPod indicator on the display blink.
3
Play the source, and adjust the
volume using the VOLUME rotary
knob.
The volume is adjustable from MIN (00)
to MAX (40). You can hold down the
VOLUME – or + buttons of the remote
control unit to reduce or bring up the
volume continuously.
ENGLISH
12
13