1. DL manuals
  2. THELIGHT
  3. Lighting Equipment
  4. 4LIGHT
  5. User Manual

THELIGHT 4LIGHT User Manual

Other manuals for 4LIGHT: User Manual
Manual is about: Battery powered LED fixture

Summary of 4LIGHT

  • Page 1

    Mains powered led fixtures user´s manual thelight luminary for cine and tv, s.L..

  • Page 2

    2.

  • Page 3: Introduction

    3 introduction this guide provides information about how to use the product functions to illuminate with this equipment as well as warnings on his use. The 4long, 4light and 6light are products of professional use for interior locations or studio and must be operated only by qualified technical pers...

  • Page 4: Safety Precautions

    4 safety precautions various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below. Warning possible risk of injury or damage to equipment danger this symbol in...

  • Page 5: Table Of Contents

    5 table of contents introduction…………………………………………………………………………………………………............................ 3 safety precautions….………….…………………………………………………………………………........................ 4 table of contents.……………….…………………………………………………………………….............................. 5 1. Main features……………………………………………………...

  • Page 6: Main Features

    6 1. Main features 4long / 4light / 6light are led panels housing a total of 192 high power led (4long) / 96 high power led (6light) / 144 high power led (6light). They have been specially designed and their colorimetry calibrated for professional photography, cinematography and television industry ...

  • Page 7: Components And Accessories

    7 2. Components and accessories each thelight kit is composed by: 1 x 4long / 4light / 6light lamp head 1 x vac control unit.

  • Page 8

    8 1 x quick link swivel-ball head with 3/8” pin 2 x removable barn doors 1 x 2,5 meters power cable 1 x 2,5 meters extension cable 1 x hexagonal 5/8” (16mm ) baby spud 1 x quick link diffusser.

  • Page 9: Names And Parts

    9 3. Names and parts 6li ght lamp head rear view 4lo ng lamp head rear view.

  • Page 10: Vac Control Unit

    10 vac control unit front view 1 power switch 2 colour temperature digital display 3 intensity level digital display 4 turbo status blue led 5 green/magenta offset status green led 6 power output 7 colour temperature adjustment buttons 8 intensity adjustment buttons 9 on/off turbo button 10 green/ma...

  • Page 11: Placing Into Operation

    11 4. Placing into operation 1. Quick link swivel ball head mounting align the swivel ball head plate to the four rivets located at the back of the lamp head as shown in the picture. Warning on mounting the lamp head on any type of support, tripod or ceiling grid make sure the swivel ball head handl...

  • Page 12

    12 2. Connecting the power cable to the vac control unit connect the power cable to the plug located in the rear side of the vdc control unit. Connect the power plug with a mains power outlet. Danger to avoid electric shocks and/or damages in the equipment the power switch located at the vac control...

  • Page 13

    13 4. Placing the vac control unit in the stand mast you can place the vac control unit in the stand mast for a handy use close to the lamp head. To do so you will need to use a regular manfrotto or avenger super clamp (not included in the kit) and insert the hexagonal 5/8” (16mm ) baby spud. Once i...

  • Page 14: Digital Adjustments

    14 5. Digital adjustments the vac control unit doubles as power supply and digital remote controller of the following light parameters through its programmed cpu: • calibrated colour temperature variation • stable colour dimming • green/magenta bias control turning the power on/off turn on the equip...

  • Page 15

    15 dimmer light intensity variation the dimmer of the vac control unit is totally digital and guarantees the regulation of light intensity without producing changes in the selected colour temperature. Light intensity can be easily increased or reduced through the +/- buttons located at the vac contr...

  • Page 16: Dmx 512 Control

    16 6. Dmx 512 control thelight lightning fixtures have been designed for a full dmx control from the 5-pin dmx port located at the back of the vac control unit. Connect the dmx cable coming from your console into the dmx in male connector located at the back fo the vac control unit. Beside the dmx i...

  • Page 17: Mechanical Adjustments

    17 7. Mechanical adjustments beam angle variation hold the lamp head from the outer segments and bend it in or out to the wanted concave or convex shape. Choose the light beam angle you need and the lamp head will remain at the chosen setting. When the lamp head is positioned at standard flat settin...

  • Page 18

    18 quick link diffuser installation to assemble the diffuser insert the four magnets in their respective holes to set- up a diffusion box as shown in the picture. Position the lamp head in its standard flat setting. Align the top diffuser box magnets with their respective screws located on the lamp ...

  • Page 19: Specifications

    19 8. Specifications 4lo ng colour temperature adjustable from 2800k a 8500k (with 100k increments) light intensity dimmable with no colour deviation (increments of 1/2 stop) green/magenta bias adjustable +/- 1/4 y 1/8 steps cri 90 from 2900k a 6500k dimensions 622 x 207 x 71 mm weight 4,4 kg power ...

  • Page 20

    20 6li ght colour temperature adjustable from 2800k a 8500k (with 100k increments) light intensity dimmable with no colour deviation (increments of 1/2 stop) green/magenta bias adjustable +/- 1/4 y 1/8 steps cri 90 from 2900k a 6500k dimensions 339 x 302 x 71 mm weight 3,5 kg power draw 140w 30v (ma...

  • Page 21

    21 chromatity coordinates diagram (x, y cie-1931) shown on the diagram are the thelight lamp head chromaticity coordinates (x, y cie-1931) feed and digitally controlled by its control unit and they are compared with the reference illuminants. These reference illuminants are the planckian locus radia...

  • Page 22: Photometrics

    22 photometrics 24 fps / 500 asa 4long 5600k 3200k lux f-stop fc meters fc f-stop lux 10000 22 930 1 650 16. 4 7000 1600 8. 2 149 3 102 5,6. 7 1100 4light 5600k 3200k lux f-stop fc meters fc f-stop lux 5500 16 510 1 418 11. 7 4500 740 5,6 69 3 56 4. 8 600 6light 5600k 3200k lux f-stop fc meters fc f...

  • Page 23: Regulations

    23 regulations this equipment is designed to meet the following regulations and safety standards for battery powered technology equipment: envinronmental thelight devices are certified and intended for indoor use (lamp head ip21, vdc control unit ip41) lamp head operatiÓn temperature from -20º to +3...

  • Page 24

    24.

  • Page 25: Warranty

    25 warranty thelight high power led light equipments are guaranteed to be free from defects in workmanship and parts in a warranty period of one (1) year from the date of purchase. Defects that occur within this warranty period, under normal use and care will be repaired or replaced at thelight disc...

  • Page 26

    26 thelight luminary for cine and tv, s.L. Www.Thelight.Com.Es 2011 © copyright thelight. All rights reserved..