The stainless steel water-heater for your woodstove user’s manual.
Heating water while heating the home with renewable wood has been done for centuries and is now reemmerging as a way to substantially reduce both monthly utilities costs and the reliance on limited fossil fuel supplies. Therma-coil is made of the highest quality stainless steel to let you safely and...
Therma-coil is manufactured in two sizes depending on the stove size and the amount of hot water needed. Smaller stoves tend to have a higher firebox temperature and gener- ally are better suited to the single u-shaped model. Larger fireboxes need more surface area and generally work best with the w...
1) measure inside the stove and using a punch and the template provided, punch two marks in the stove wall. 2) check again inside and out, remembering the 6” nipples will go through the holes made in the stove as well as any heat shields that your stove may have. The therma-coil should exit out the ...
Thermosiphon (passive) method the easiest, most economical and desirable method of thermo-coil water heating is the ther- mosiphon, using no pumps, controls or electricity. Heated water from the therma-coil is less dense, lighter, and naturally rises to the top of the water-heater or storage tank. T...
Pumped (active) method when the water heater isn’t located close to and higher than the stove, a small circulator pump and controller is used. The differential controller compares a probe sensor inside the bottom of the water heater / storage tank, and a probe sensor inside the therma-coil exit line...
Therma-coil po box 688 browns valley, ca 95918 530-743-0908 info@therma-coil.Com contact.
