Thermador VCI236DS Design Manual - Ventilation
1.800.735.4328 | THERMADOR.COM
163
VENTILA
TION — CHIMNEY W
ALL HOODS
VENTILATION
CHIMNEY WALL DRAWER HOOD (36")
HDDW36FS
INSTALLATION NOTE: This product ships with two
transport brackets to hold the moveable canopy in place
during shipping and installation. After installation, be sure to
remove the brackets to operate the sliding drawer canopy.
INSTALLATION OPTIONS
Thermador Chimney Wall Hoods may be installed above a
Thermador non-professional gas, electric, or induction cooktop
to create a convenient cooking center. Refer to the appropriate
section for additional specifications.
Hood installation height above a cooktop can vary. To obtain
the necessary installation height above a Thermador non-
professional gas, electric, or induction cooktop, consult the
appliance’s installation manual.
Thermador Chimney Wall Hoods must be mounted on a wall.
These hoods are designed to be used for vertical discharge.
A 600 CFM integrated blower is included.
BLOWER PRESSURE CURVES
HDDW36FS
NOTE: All measurements are made with 3 ft. straight duct,
90° bend and 1 ft. straight duct at exhaust. These are NOT
free blowing measurements.