Trion Mister-MINI User Manual - page 6
6
Installation
Remember to select a location that is readily accessible for periodic inspection and
cleaning of your humidifier.
Mounting:
1 Read the instructions carefully prior to installing this product to ensure safe
operation. Failure to follow these instructions could damage the humidifier or
cause a hazardous condition Property damage may result from improper
installation
2 Check the ratings given on the product to make sure it is suitable for your ap-
plication Do not install this product on heat pump systems
3 Tape the template (included inside the carton) in place on the duct.
4 Drill the (4) 1/8” diameter holes as indicated. These are used to secure the
unit to the duct
5 Neatly cut out the 3 1/8" x 3 1/8" opening according to the "cut out on line"
indicator on the template A portion of the unit will be inserted through this
opening
6 Remove all sharp edges and burrs to prevent damage to the unit or injury to
yourself
7 Remove the screw on the unit that secures the cover & nozzle assembly and
pull back on the water fitting to release the humidifier cover from the hous-
ing All of the components inside of the unit are attached to the cover and will
come off with the cover
8 Mount the unit housing with gasket (included) to the duct using the (4) mount-
ing screws (included). Please refer to the illustration on the next page for
reference