Triotech clear stream zoomtak T8+ Quick Start Manual - page 8
8
3. Using your Remote Controller
2.6 Calibrating Your Screen
If you find that some of the text is missing in the corners of your Home screen, your
system needs to be calibrated to your TV. To do this, from the Home screen, go
RIGHT to the SETTINGS heading and press OK. Then choose the SYSTEM
heading, then VIDEO OUTPUT, then the VIDEO CALIBRATION option on the right.
This will go to the screen as shown below.
After a minute or so, you will see the Home Screen appear.
Please refer to the REMOTE KEYCARD sheet that came with your unit for
details on how your particular remote functions. All remote guides can also be
found online by going to www.triotechgroup.com/remotes.
You will then go through a process of moving the arrow to the top left corner of your
TV screen until it’s fits top and left, and press the OK button. The same process is
carried out in the bottom right of the screen, followed by selecting where the subtitles
should appear. Finally you will see a square in the centre of the screen. Use the
LEFT/RIGHT buttons on your remote to make it a perfect square and press return.
You can exit the menu back to the home screen using your BACK or RETURN
button on your remote Your screen is now calibrated.