Triple S C12 Operating Instructions Manual - How to Use
Hold filter bag collar (A) as shown.
Align opening in filter bag with dirt
tube (B) inside the outer bag.
Push bag collar firmly onto dirt tube.
Tuck in filter bag; zip outer bag.
5
The assembled cleaner will look like the
drawing.
1. Handle
2. ON/OFF switch
3. Cord hooks:
wrap cord around
hooks for storage. Top hook rotates
for easy cord release.
4. Bag cap
5. Outer bag
6. Stair cleaning handle:
located on
lower edge of bag.
7. Handle release lever:
step on lever
to lower handle to operating or low
position.
8. Cleaner body
9. Furniture guard:
helps prevent
cleaner from marking furniture.
10. Hood
11. Extra belt storage:
open door to
store extra belt.
16
Continued
➜
B
A
A
Step 5 Attach filter bag
1
4
3
2
7
5
6
8
9
10
11
17
How to use
Cleaner description
Operate cleaner only at voltage speci-
fied on data plate on bottom of clean-
er.
WARNING: Electrical shock could
occur if used outdoors or on wet sur-
faces.
To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other). this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a quali-
fied electrician to install the proper outlet.
do not change the plug in any way.
ON/OFF Switch
To turn cleaner on, push switch up.
To turn cleaner off, push switch down.
CAUTION: When the cleaner is turned
ON, the agitator continues to rotate
while the handle is in the upright posi-
tion.