Triplex T3200-DVR User Manual - page 27
27
Appendix D –Mobile Phone AP Installation Guide
JViewer is an application program for JAVA MIDP 2.0, data
communication should set to Wi-Fi/WLAN, 3.5G/HSDPA, 3G as well.
(1) Application program installation
(a) Via CD-ROM:
Copy JViewer.jad and JViwer.jar in
cd-rom to phone flash memory, then click
either one file to start installation.
(b) Via Internet:
Go
http://60.251.65.170/jviewer
to
download the most updated software with PC
or mobile phone. If PC, copy those downloads
to your mobiles first.
(2) Application program setup – NOKIA N78 as example
JViewer has been saving as application
program after installation.
Press
, and then open “Apps”.
*Note : Different brands of mobile phone have
different settings. Please refer to user manual of
it.
JViewer will be found in the bottom of
screen, and then open it.
Please input your IP address and
password which has been set in the
DVR, and then press “Options”.
Select “Connect” to link the Internet.
By "yes" to ignore the security warning
message
Select the way to link the Internet.
Please wait!
If the connection is successful, it will
have the monitoring screens.
*Note :
1. Picture quality depends on the DVR recording
setting and/or the strength of the mobile phone
signals.
2. Change resolution of mobiles if the screen is
blinking.
If the connection fails, please exit the
program, and so on 2 or 3 minutes later
to try again.
*Note : The connection is successful or not,
depends on the strength of the mobile phone
signals