Tripp Lite PDU3VN-Series Owner's Manual - Features
CONFIG
A
B
A
B
8
Features
RJ-45 CONFIG Port:
The port is reserved for configuration by factory
authorized personnel only. Do not connect anything to this port.
Ethernet Port:
Use this RJ-45 jack to connect the PDU to the network with a
standard Ethernet patch cable. The Link LED
A
and Status LED
B
indicate
several operating conditions, as shown in the table below. This port is not
compatible with PoE (Power Over Ethernet) applications.
Network Operating Conditions
A
Link LED Color
Off
No Network Connection
Flashing Amber
100 Mbps Network Connection
Flashing Green
10 Mbps Network Connection
B
Status LED Color
Off
Card Not Initialized
Steady or Flashing Green
Card Initialized and Operational
Steady Amber
Error - Card Not Initialized
Configuration and Operation
Remote Monitoring and Control
The PDU provides remote monitoring
A
, outlet
control
B
and more via Web browser, telnet and
SNMP-based Network Management Systems.
For more information about configuration and
operation of the PDU via thePowerAlert Web
browser interface, refer to the SNMPWEBCARD
User’s Guide, included on the CD-ROM bundled
with the PDU.
201007158 93-3038.indb 8
8/30/2010 10:07:38 AM