1. DL manuals
  2. µ-Dimension
  3. Inverter
  4. 12WA10N
  5. Owner's Manual

µ-Dimension 12WA10N Owner's Manual

Manual is about: DC to AC Power Inverters Pure Sine Wave Output

Summary of 12WA10N

  • Page 1

    Dc to ac power inverters pure sine wave output owner’s manual models: 12wa7n 12wa10n ®.

  • Page 2: Table of Contents

    2 form 122175 table of contents section 14 warranty …………………………………………………………………….. 15 section 13 appendix …………………………………………………………………… 14 section 12 accessories ……………………………………………………………….. 14 section 11 troubleshooting …………………………………………………………. 13 dc input wiring diagram …………..……...………………………. 10 section 9 ...

  • Page 3: 1. Safety Instructions

    3 form 122175 1. Safety instructions important: read this manual before installation, it contains important safety, installation, and operating instructions. Save this manual and keep it in a safe place. Sensata technologies is an iso 9001:2008 registered company 1.1 inverter safety instructions: • ...

  • Page 4: 2. Technical Specifications

    4 form 122175 2. Technical specifications 2.1 other design features: patented construction and cooling methods with thermally controlled cooling fan , local gfci outlet protection, and remote “on/off” switch hookup. 2.2 unit protection: automatic electronic short circuit/overload protection , automa...

  • Page 5: 3. Nomenclature

    5 form 122175 3. Nomenclature - input voltage: 12 = 12vdc di = dimensions inverters; other suffixes designates private label customer pure sine signal output output wattage: 7 = 700-watt; 10 = 1000-watt chassis designation: wa n 3-letter suffix designation base model di 12 wa 7.

  • Page 6: 4. Physical Description

    6 form 122175 4. Physical description figure 1: inverter physical description (1) gfci outlets: 120vac output. (2) led status control panel: provides inverter status (see figure 2 on page 7) (3) output breaker: trips to protect the inverter’s internal circuitry from shorted ac loads or overload situ...

  • Page 7

    7 form 122175 figure 2: control panel description (1) external power: the green led indicates that there is an external ac power line applied to the inverter ac input (early models only.) (2) inverter power “on”: the green led indicates that the inverter is operating from batteries in inverter mode....

  • Page 8: 5. Mounting The Inverter

    8 form 122175 5. Mounting the inverter note: before mounting the inverter system, read the safety instruction section on page 3. 5.1 tools for installation: the following tools are needed for inverter installation: crimper, cable ties, cutter, drill, # 2 phillips screw driver, tape measure, wire cut...

  • Page 9: 6. Dc Wire Gauge & Fusing

    9 form 122175 6. Dc wire gauge & fusing 6.1 inverter cable: an “inverter cable” kit (positive cable, negative cable and proper fuse) is needed to connect the inverter to a battery bank. An 8-gauge cable is also needed to connect the inverter’s bonding lug to ground. The inverter cable length and the...

  • Page 10: 8. Dc Input Wiring Diagram

    10 form 122175 8. Dc input wiring diagram figure 4: inverter cable assembly and remote on/off switch assembly kit c a bl e c o nn e c ti on p roc e d u re 1) r e mo ve the i n -l ine fus e s fr om the fuse-hol ders for cable in st allatio n . 2) c o nnect the i n verter’s bonding l u g t o gr ound o...

  • Page 11: 9. Overall Wiring Diagram

    11 form 122175 9. Overall wiring diagram figure 5: typical ac & dc wiring diagram – auxiliary battery configuration.

  • Page 12: 10. Theory of Operation

    12 form 122175 10. Theory of operation the “local on/off switch” located on front, or the “remote on/off switch” if used controls the inverter. Both the local and “remote on/off” switches are configured in series. To control the inverter remotely set the “local on/off switch” to on. Inverter power m...

  • Page 13: 11. Troubleshooting

    13 form 122175 11. Troubleshooting call or e-mail customer service for free consultation during business hours (central time) at: 1-800-553-6418; 1-651-653-7000; fax: 1-888-439-3565; 1-651-653-7600 e-mail: inverterinfo@sensata.Com; http://dimensions.Sensata.Com 1) no ac output power: 1.1) no leds on...

  • Page 14: 12. Accessories

    14 form 122175 12. Accessories adi part number item description 430011 fuse 100a, ann-250 430052 fuse 150a, ann-150 430054 fuse 350a, ann-350 430010 fuse 200a, ann-200 431021 fuse holder with cover 611096 inverter cable assembly 10ft, 4-gauge, 200a fuse and fuse holder 611089 inverter cable assembly...

  • Page 15

    15 form 122175 limited warranty terms & conditions shipping terms: f.O.B. St. Paul minnesota. Freight prepaid and billed, subject to prior credit approval. Minimum order: $50.00 net price loss or damage: loss or damage in transit are the responsibility of the carrier. Any claim should be filed with ...

  • Page 16

    16 form 122175 4467 white bear parkway st. Paul, mn 55110 phone: 651-653-7000, 800-553-6418 fax: 651-653-7600, 888-439-3565 inverterinfo@sensata.Com www.Dimensions.Sensata.Com form # 122175 03/25/2013 © sensata technologies 2013 printed in u.S.A..