U-Line H-1027 User Manual - page 4
Manual is about: PNEUMATIC STICK Stapler
of
11
0513 IH-1027
PAGE 4 OF 11
safety InstrUctIons contInUed
clIncH adjUstMent
Use 2.5 mm Allen wrench and turn collar through window
clockwise to tighten clinch. (See Figure 6)
deptH adjUstMent
1. Loosen front screw with a 6 mm Allen wrench.
(See Figure 7)
2. Push the body up and adjust to the desired depth.
(See Figure 8)
3. When the top edge of the adjustment plate is at
its highest setting the teeth are at their shallowest
penetration. (See Figure 9)
4. If set at No. 1 the teeth are at their deepest
penetration. (See Figure 10)
Tight
Medium
Loose
Loosen
Tighten
No. 1
No. 2 & 3
No. 4
Adjustment Plate
Figure 6
Figure 7
Figure 9
Figure 8
Figure 10