- DL manuals
- U-Line
- Ice Maker
- Marine Series WH95FC
- User manual
U-Line Marine Series WH95FC User manual
Summary of Marine Series WH95FC
Page 1
User guide safety • installation & integration • operating instructions • maintenance • service marine series • wh95fc • 14" crescent ice maker right product. Right place. Right temperature. Since 1962..
Page 2
User guide u-line.Com contents safety • installation & integration • operating instructions • maintenance • service intro safety safety and warning disposal and recycling installation environmental requirements electrical cutout dimensions product dimensions water hookup general installation grille ...
Page 3
User guide introduction 1 u-line.Com welcome to u-line congratulations on your u-line purchase. Your product comes from a company with over five decades and three generations of premium modular ice making, refrigeration, and wine preservation experience. U-line continues to be the american leader, d...
Page 4
User guide safety and warning 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service safety and warning notice please read all instructions before installing, operating, or servicing the appliance. Use this appliance for its intended purpose only and follow...
Page 5
User guide disposal and recycling 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service disposal and recycling danger ! Risk of child entrapment. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so child...
Page 6
User guide environmental requirements 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service environmental requirements this model is intended for indoor/interior applications only and is not to be used in installations that are open/ exposed to natural ele...
Page 7
User guide electrical 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service electrical warning ! Shock hazard — electrical grounding required. Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected. Never rem...
Page 8
User guide cutout dimensions 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service cutout dimensions prepare site your u-line product has been designed for either free- standing or built-in installation. When built-in, your unit does not require additional...
Page 9
User guide product dimensions 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service product dimensions 17" (432 mm)* 25-1/16" (637 mm) 14" (356 mm) 8 15/16" (227 mm) *add 1-1/2" for for water line clearance.
Page 10
User guide water hookup 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service water hookup prepare plumbing the water valve uses a standard 1/4" (6.35 mm) compression fitting. U-line recommends using accessory water hook up kit – part # waterhookup. The ki...
Page 11
User guide water hookup 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service 3. Locate water valve in the front of the unit and thread water supply line through. Notice route the water supply line through the unit so it does not come into contact with any...
Page 12
User guide general installation 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service general installation leveling information notice because these units do not have leveling legs, it is extremely important that they sit on a level surface. If they are no...
Page 13
User guide grille - plinth installation 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service grille - plinth installation removing and installing grille warning ! Disconnect electric power to the unit before removing the grille. When using the unit, the g...
Page 14
User guide door swing 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service door swing all units have a zero clearance for the door to open 90°. U-line recommends a minimum door clearance of 3/4" (19 mm) to accommodate the handle if the unit is installed n...
Page 15
User guide door adjustments 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service door adjustments checking door alignment the unit’s door is aligned at the factory before shipment. However, its alignment could have been disturbed during shipment. Notice p...
Page 16
User guide door adjustments 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service 6. Install hinge on opposite side at bottom of cabinet. Align hinge outer edge with cabinet before tightening screws. 7. Relocate plastic spacer/bushing on top and bottom of ...
Page 17
User guide door adjustments 3 u-line.Com safety • installation & integration • operating instructions • maintenance • service 12.Remove all three screws on the opposite side of the hinge and carefully lift off the door latch assembly. 13.Place the door latch assembly on opposite side of unit. Be sur...
Page 18
User guide door latch 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service door latch the door latch assembly included with your unit can be installed to prevent the door from opening when the vehicle is in motion. To install, perform the following: 1. Re...
Page 19
User guide first use 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service first use all u-line controls are preset at the factory. Initial startup requires no adjustments. Notice u-line recommends discarding the ice produced during the first two to three ...
Page 20
User guide ice 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service ice ice maker operation when the ice bucket is full, the ice making mechanism will shut off. However, the refrigeration system will continue to cool and maintain the ice supply. Notice do...
Page 21
User guide ice 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service ice maker adjustment ice cube thickness adjustment interval - as required on ice maker equipped models, adjust the cube size by changing water amount injected into the ice maker assembly ...
Page 22
User guide airflow and product loading 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service airflow and product loading notice the unit requires proper airflow to perform at its highest efficiency. Do not block the front grille at any time, or the unit wi...
Page 23
User guide cleaning 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service cleaning exterior cleaning vinyl clad (black or white) models clean surfaces with a mild detergent and warm water solution. Do not use solvent-based or abrasive cleaners. Use a soft ...
Page 24
User guide cleaning 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service defrosting manual defrost models this unit is a manual defrost model and will require occasional defrosting. When there is build-up of 1/4" (6 mm) or more of frost, manually defrost ...
Page 25
User guide cleaning condenser 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service cleaning condenser interval - every six months to maintain operational efficiency, keep the front grille free of dust and lint, and clean the condenser when necessary. Depe...
Page 26
User guide extended non-use 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service extended non-use vacation/holiday, prolonged shutdown the following steps are recommended for periods of extended non-use: 1. Remove all consumable content from the unit. 2. ...
Page 27
User guide troubleshooting 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service troubleshooting before calling for service if you think your u-line product is malfunctioning, read the control operation section to clearly understand the function of the con...
Page 28
User guide troubleshooting 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service checking product temperature to check the actual product temperature in the unit: 1. Partially fill a plastic (nonbreakable) bottle with water. 2. Insert an accurate thermomet...
Page 29
User guide warranty 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service warranty u-line corporation limited warranty 1. U-line corporation (“u-line”) warrants each u-line product to be free from defects in materials and workmanship for a period of one ye...
Page 30
User guide warranty 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service of pool water, or directing a spray from a hose or similar device into and around the unit. 7. If a product defect is discovered during the applicable warranty period, you must promp...
Page 31
User guide wire diagram 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service wire diagram 42312_c wiring diagram neutral black relay embraco compressor green or green w/ yellow ground: overload cap emu onl y manu al contr ol icemaker & combo rocker switch...
Page 32
User guide product liability 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service product liability important note: service or repairs must not be performed on any unit suspected to be involved in a property damage situation. If a unit has been altered or...
Page 33
User guide warranty claims 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service warranty claims the following information defines the parameters for filing a warranty claim: • valid serial number needed • valid model number needed • narda (or equivalent) ...
Page 34
User guide ordering replacement parts 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service ordering replacement parts parts may be ordered on-line, by fax or on the phone. See our contact information below: www.U-lineservice.Com (with service login) fax n...
Page 35
User guide system diagnosis guide 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service system diagnosis guide refrigeration system diagnosis guide system condition suction pressure suction line compressor discharge condenser capillary tube evaporator watt...
Page 36
User guide compressor specifications 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service compressor specifications danger ! Electrocution can cause death or serious injury. Burns from hot or cold surfaces can cause serious injury. Take precautions when s...
Page 37
User guide troubleshooting - extended 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service troubleshooting - extended specific errors & issues caution ! Never attempt to repair or perform maintenance on the unit until the main electrical power has been di...
Page 38
User guide troubleshooting - extended 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service not freezing (compressor and fans not operating). Power cord not plugged in. Plug in power cord. On/off switch in off position. Turn switch to on position. On/off s...
Page 39
User guide troubleshooting - extended 3 u-line.Com safety • installation & integration • operating instructions • maintenance • service ice maker diagnosis flow chart does the unit refrigerate? Sealed system leak electrical failure compressor failure fan motor failure defrost system failure low volt...
Page 40
User guide troubleshooting - extended 4 u-line.Com safety • installation & integration • operating instructions • maintenance • service ice maker operating cycles freeze cycle • temperature control terminals 2 and 3 are closed. • power to the condenser. • power to the condenser fan. Figure 1. Freeze...
Page 41
User guide troubleshooting - extended 5 u-line.Com safety • installation & integration • operating instructions • maintenance • service harvest-1 cycle • temperature control terminals 2 and 3 are open - 2 and 1 close. • no power to the compressor or condenser fan. • if bin arm is down, power goes th...
Page 42
User guide troubleshooting - extended 6 u-line.Com safety • installation & integration • operating instructions • maintenance • service harvest-2 cycle • ice maker ejector blades reach approximately 2:00 position and cam depresses the hold switch. Power goes through the hold switch to the ice maker ...
Page 43
User guide troubleshooting - extended 7 u-line.Com safety • installation & integration • operating instructions • maintenance • service water fill cycle • ice maker ejector blades reach approximately 10:00 position and cam depresses the water fill switch. • power to the water valve. Ice maker mold f...
Page 44
User guide troubleshooting - extended 8 u-line.Com safety • installation & integration • operating instructions • maintenance • service temperature control specifications double throw ice maker thermostat numbers 4548, ar-19-12, 2636, 2690, 2691, 2717, 2783, 2782-s, 2763-s, 2780, 80-26005-02 these t...
Page 45
User guide troubleshooting - extended 9 u-line.Com safety • installation & integration • operating instructions • maintenance • service limit switch specifications • normally closed bi-metal switch • open temperature: 104°f • close temperature: 83°f the function of this switch is to open in the even...
Page 46
User guide troubleshooting - extended 10 u-line.Com safety • installation & integration • operating instructions • maintenance • service replacing ice maker assembly (co29f only) 1. Unplug the unit from the main power source. 2. Disconnect ice maker wire harness at plug (1). 3. Remove control capill...
Page 47
User guide troubleshooting - extended 11 u-line.Com safety • installation & integration • operating instructions • maintenance • service replacing ice maker assembly (all models except co29f) 1. Remove back panel. 2. Disconnect all wires at bell connectors (5 wires-models bi95, bi98 or sp18; or plug...
Page 48
User guide defrost 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service defrost these units are manual defrost. To defrost unit remove ice bucket. Turn unit off. Use toweling inside to absorb water as it melts down. This will help prevent water from getti...
Page 49
User guide replace ice maker 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service replace ice maker the new ice maker assembly you have received will have a plug-in connection. In some instances you may need to cut plug off from cable and hard-wire the co...