- DL manuals
- U-Line
- Refrigerator
- BI-95
- User Manual
U-Line BI-95 User Manual
Summary of BI-95
Page 1
User guide safety • installation & integration • operating instructions • maintenance • service marine series • ss1095 • 14" crescent ice maker right product. Right place. Right temperature. Since 1962..
Page 2
User guide u-line.Com safety • installation & integration • operating instructions • maintenance • service contents intro safety safety and warning disposal installation environmental requirements electrical cutout dimensions product dimensions water hookup general installation grille / plinth insta...
Page 3
User guide introduction 1 u-line.Com welcome to u-line congratulations on your u-line purchase. Your product comes from a company with over five decades and three generations of premium modular ice making, refrigeration, and wine preservation experience. U-line continues to be the american leader, d...
Page 4
User guide safety and warning 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service safety and warning notice please read all instructions before installing, operating, or servicing the appliance. Use this appliance for its intended purpose only and follow...
Page 5
User guide disposal and recycling 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service disposal and recycling danger ! Risk of child entrapment. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so child...
Page 6
User guide environmental requirements 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service environmental requirements this unit is designed to operate between 50°f (10°c) and 100°f (37°c). Higher ambient temperatures may reduce the unit’s ability to reach...
Page 7
User guide electrical 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service electrical warning ! Shock hazard — electrical grounding required. Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected. Never rem...
Page 8
User guide cutout dimensions 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service cutout dimensions prepare site your u-line product has been designed for either free- standing or built-in installation. When built-in, your unit does not require additional...
Page 9
User guide product dimensions 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service product dimensions 17" (432 mm) * 9" (229 mm) *add 1-1/2" for water line clearance 25-1/16" (637 mm) 14" (356 mm).
Page 10
User guide water hookup 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service water hookup prepare plumbing the water valve in this unit uses a standard 1/4" (6.35 mm) compression fitting. U-line recommends a braided stainless steel water supply line. P/n ...
Page 11
User guide water hookup 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service 3. Locate water valve in the front of the unit and thread water supply line through. Notice route the water supply line through the unit so it does not come into contact with any...
Page 12
User guide general installation 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service general installation leveling information notice it is extremely important that these units sit on a level surface, as they do not have feet levelers. If they are not lev...
Page 13
User guide grille - plinth installation 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service grille - plinth installation removing and installing grille warning ! Disconnect electric power to the unit before removing the grille. Warning ! Do not touch the...
Page 14
User guide door swing 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service door swing all units have a zero clearance for the door to open 90°. U-line recommends a minimum door clearance of 3/4" (19 mm) to accommodate the handle if the unit is installed n...
Page 15
User guide door adjustments 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service door adjustments checking door alignment the unit’s door is aligned at the factory before shipment. However, its alignment could have been disturbed during shipment. Notice p...
Page 16
User guide door adjustments 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service 6. Install hinge on opposite side at bottom of cabinet. Align hinge outer edge with cabinet before tightening screws. 7. Relocate plastic spacer/bushing on top and bottom of ...
Page 17
User guide door adjustments 3 u-line.Com safety • installation & integration • operating instructions • maintenance • service 13.Remove all three screws on the opposite side of the hinge and carefully lift off the door latch assembly. 14.Place the door latch assembly on opposite side of unit. Be sur...
Page 18
User guide door latch 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service door latch the door latch assembly included with your unit can be installed to prevent the door from opening when the vehicle is in motion. To install, perform the following: 1. Re...
Page 19
User guide first use 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service first use all u-line controls are preset at the factory. Initial startup requires no adjustments. Notice u-line recommends discarding the ice produced during the first two to three ...
Page 20
User guide ice 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service ice ice maker operation when the ice bucket is full, the ice making mechanism will shut off. However, the refrigeration system will continue to cool and maintain the ice supply. Notice do...
Page 21
User guide ice 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service ice maker adjustment ice cube thickness adjustment interval - as required on ice maker equipped models, adjust the cube size by changing water amount injected into the ice maker assembly ...
Page 22
User guide airflow and product loading 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service airflow and product loading notice the unit requires proper airflow to perform at its highest efficiency. Do not block the front grille at any time, or the unit wi...
Page 23
User guide cleaning 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service cleaning exterior cleaning vinyl clad (black or white) models clean surfaces with a mild detergent and warm water solution. Do not use solvent-based or abrasive cleaners. Use a soft ...
Page 24
User guide cleaning 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service defrosting manual defrost models this unit is a manual defrost model and will require occasional defrosting. When there is build-up of 1/4" (6 mm) or more of frost, manually defrost ...
Page 25
User guide cleaning condenser 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service cleaning condenser interval - every six months to maintain operational efficiency, keep the front grille free of dust and lint, and clean the condenser when necessary. Depe...
Page 26
User guide extended non-use 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service extended non-use vacation/holiday, prolonged shutdown the following steps are recommended for periods of extended non-use: 1. Remove all consumable content from the unit. 2. ...
Page 27
User guide accessories 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service accessories 80-51004-00 accessories - anti-tip mounting brackets us$18.99 waterhookup accessories - braided water line supply kit us$49.00
Page 28
User guide troubleshooting 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service troubleshooting before calling for service if you think your u-line product is malfunctioning, read the control operation section to clearly understand the function of the con...
Page 29
User guide troubleshooting 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service checking product temperature to check the actual product temperature in the unit: 1. Partially fill a plastic (nonbreakable) bottle with water. 2. Insert an accurate thermomet...
Page 30
User guide warranty 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service warranty u-line corporation limited warranty 1. U-line corporation (“u-line”) warrants each u-line product to be free from defects in materials and workmanship for a period of one ye...
Page 31
User guide warranty 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service 7. If a product defect is discovered during the applicable warranty period, you must promptly notify either u-line at 8900 n. 55th street, milwaukee, wisconsin 53223 usa or at +1.800...