U-Reach BD18 SERIES User Manual - page 5
Chapter 2. Function Table
5
Function
Sub-function
Description
1 Copy
To copy disc to disc or copy disc fromHDD.
2 Test
To simulate copy process.
3 Compare
To bit by bit compare between source disc and copied discs.
4 Copy & Compare
To copy first and compare the copied discs later. To ensure data correctness.
5 Set Burn Speed
To set burning speed for duplication.
6 Select Source
To select source from any optical driveor hard disk drive.
7 Utility
1 Information
① Disc Info.
To check the format of disc, burningspeed supported and total capacity
ordata size.
② Drive Info.
To check the version, model No. andbrand name.
③ System Info.
To check the model No. and firmware version.
2 Erase Disc
① Quick Erase
To quick erase data from rewritable disc.
② Full Erase
To full erase data from rewritable disc.
3 PreScan Source
To check source disc’s readability.
4 Track Edit
① Copy Track
To select and combine audio tracks from various CDs into a single customized
audio CD.
② Close Disc
To close the disc after track copying to make the CD playable on CD player.
③ Disc Info.
To check the audio CD’s status of usage.
5 Eject All Disc
To eject all trays.
6 Copy Counter
① Show Count
To check how many d i scs copy successfully and failed.
② Enable Counter
To enable or disable counter setting.
③ Clear Counter
To delete the record.
7 Update BIOS
To update the system’s firmware.
8 PRINT LS Label
To print Lightscribe image.