U-Reach V5.30 User Manual - Chapter 4. Appendix
Manual is about: DVD/Blu-ray Duplicator
of
32
Chapter 4. Appendix
27
Step
2
Execute "LightScribe Drive select.exe".exe file to select LightScribe Drives
1. Receive a .exe file from your supplier.
2. Execute the .exe file on your PC.
3. And select the LightScribe Duplicator drive on the list.
4. If the duplicator’s Lightscribe drive is not on the list, please follow below steps to add new
lightscribe drive to the support list.
❶ Plug the new lightscribe drive you will use for Duplicator to the PC.
❷ Click "Detect Lightscribe Drive And Disc " to search new available lightscribe drive.
❸ Select the new drive and press
, the drive will be added to the list.
**Note:
When everytime the Duplicator change LightScribe drive, must re-select drive
before create LightScribe image for that Duplicator.