V-fit GE1 Assembly & User Manual - Assembly
Assembly
Page 20
Abdominus Tummy Trimmer
Attach the Headrest (1) to the Headrest Frame (2) using the 2 x M6 x
35mm Screws (17). Align the Headrest and securely tighten the
screws.
Note
Some of these parts are pre-
fitted at the factory to facilitate
easier assembly. We suggest
that you loosely fit all the
components together first before
contacting our Customer
Support team about any missing
parts.
Carefully unpack each component, checking against the parts list that
you have all the necessary parts to complete the assembly of your
product.
PLEASE NOTE that some of the parts may be pre-fitted to major
components, so please check carefully before contacting our
CUSTOMER SUPPORT team.
In any event, please do not return the product to your retailer before
contacting us first.
Tel:- 0871 222 0881 or
Fax:- 01535 637722 or
E-mail:- beny@benysports.co.uk
CUSTOMER SUPPORT is open from 9.00am to 5.00pm from Monday
to Friday.
Beny Sports Co. UK Ltd.
Greenroyd Mill,
Sutton in Craven,
Keighley, West Yorkshire
BD20 7NG
1
Ensure that when completely
assembled, the THICKER part of
the Headrest is angled
downwards, just touching the
floor. This will ensure correct
placement of the head and neck
during use. As you look at the
assembled Abdominus Tummy
Trimmer when complete, the V-fit
print on the headrest will be
facing you.
Note
1
17
2
17
abdominus.qxp 30/4/02 4:38 pm Page 20