V-fit TRV1-12 Assembly & User Manual - User Instructions
User Instructions
Page 18
2. FUNCTION KEY:
2.1“START” “STOP”: button, in standby mode, press the START button to start the treadmill. Press the STOP to stop
the treadmill, all data will be saved. To clear all data, pull the Safety Key out.
2.2 PROGRAMME: button, in standby mode, press the "P" button to cycle through (P1、P2、P3、P4、P5、P6、P7).
2.3 MODE: button, in standby mode, press the "M" button to select between Time, Distance and Calories.
Change the Time, Distance and Calories by pressing "+ or -" buttons, then press START to begin exercise.
2.4 SPEED”+”: button, while exercising, press the Speed "+" button to increase the speed in 0.1KM/H increments.
Press and hold the button to increase the speed quicker.
2.5 SPEED”-“: button, while exercising, press the Speed "-" button to decrease the speed in 0.1KM/H increments.
Press and hold the button to decrease the speed quicker.
2.6 “QUICK SPEED”: 4 speed short cut buttons, while exercising, choose between any speed 3,6,9,12.
3. PROGRAMME
3.1 Countdown Time training mode: in standby mode, press the “MODE” button, the Time window display will flash, the
default setting displays 30:00, press +/- button to set the required value. The setting range: 5-99 minutes.
Press the “START” button to begin exercising. When the countdown time reaches 00:00, the treadmill will stop automatically.
3.3 Countdown Distance training mode: in standby mode, press the “MODE” button twice, the Distance window display will flash,
the default setting displays 5.0KM, press +,- button to set the required value. The setting range: 0.5-99.0KM.
Press the “START” button to begin exercising. The start up speed is 0.8KM/H, press SPEED+/- to increase or decrease the speed.
When the countdown Distance reaches 0.0, the treadmill will stop automatically.
1. CONSOLE PANEL