Version 07.04.2011 video-inserter vl2-mmi2g for audi with mmi2g navigation system video-inserter with 2 video + rgb + rear-view camera input.
Version 07.04.2011 vl2-mmi2g p a g e 2 contents 1. Prior to installation 1.1. Delivery contents 1.2. Checking the compatibility of vehicle and accessories 1.3. Dip-switch settings 1.3.1. Enabling the interface’s video inputs (dip 1-3) 1.3.2. Rear-view camera settings (dip 5) 2. Installation 2.1. Pla...
Version 07.04.2011 vl2-mmi2g p a g e 3 product features rgb-input for after-market navigation 2 video-inputs for after-market devices (e.G. Dvd-player, dvb-t tuner, …) built-in audio-switch rear-view camera input, automatically switching factory rear-view camera compatible pal/ntsc input compatible ...
Version 07.04.2011 vl2-mmi2g p a g e 4 requirements general monitor with 4pin lvds mitsumi connector on backside vehicle audia4, a5 (b8), a6 (4f), a8 (4d/4e), q7 (4l) navigation/radio navigation mmi 2. Generation limitations video only the interface inserts only video into the infotainment, for soun...
Version 07.04.2011 vl2-mmi2g p a g e 5 1.3.2. Rear-view camera settings (dip 5) depending on whether no camera, after-market camera or factory camera shall be used, dip 5 must use different settings. If set to off, the interface switches to factory lvds picture when the reverse gear is engaged to di...
Version 07.04.2011 vl2-mmi2g p a g e 6 2.2. Connections video interface mitsumi interface lvds cable backside monitor control-box lvds lead of factory harness d ip s wit ch es r gb i n p u t video -i n 1 video -i n 2 c amer a- in pi c set ti n g s pin-definition white 6pin power connector pin 1 (yel...
Version 07.04.2011 vl2-mmi2g p a g e 7 2.3. Installation procedure – function check follow the below procedure using the “connections” scheme from chapter 2.2. As reference. Before the installation of the sources and the interface we recommend a first quick connection of the interface and test run t...
Version 07.04.2011 vl2-mmi2g p a g e 8 2.4. Picture settings after installing the sources the picture settings can be changed using a pen on the buttons of the video interface. Press the menu button to open settings menu on the osd and to switch to the next setting. Up and down change the correspond...
Version 07.04.2011 vl2-mmi2g p a g e 9 3. Interface operation the nav button is used to execute interface functions. Press nav button – video input switching, each press will switch to the next enabled input. If all inputs are enabled the order is: factory video rgb-in video in1 video in2 factory vi...
