V.link VL2-MMI2G Manual - page 4
Version 07.04.2011
VL2-MMI2G
P
a
g
e
4
Requirements
General
monitor with 4pin LVDS Mitsumi connector on backside
Vehicle
AudiA4, A5 (B8), A6 (4F), A8 (4D/4E), Q7 (4L)
Navigation/Radio
Navigation MMI 2. generation
Limitations
Video only
The interface inserts ONLY video into the infotainment,
for sound use the FM-modulator or an AUX-in interface
AUX-1xx or a Dension Gateway 500.
1.2.
Checking the compatibility of vehicle and accessories
1.3.
Dip-switch settings
With the video interface boxes dip-switches it is possible to dis- or enable the interfaces
inputs (dip 1 to 3) and to preselect the type of camera which is (to be)
installed (dip 5).
Dip position down is ON and position up is OFF.
1.3.1. Enabling the interface’s video inputs (dip 1-3)
Only the enabled video inputs can be accessed when switching through the video sources. It
is recommended to enable only the required inputs.
Dip
Video-input ON (down)
OFF (up)
Dip 1
RGB
enabled
disabled
Dip 2
Video IN1
enabled
disabled
Dip 3
Video IN2
enabled
disabled