V7 EGS16 User Manual - Inst
6
INST
ALL
ATION
NOTE:
• Never remove the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the
appropriate electrical inspection or an authority electrician if you are not sure about what suitable grounding is available.
• Do not use adapter plugs or remove the grounding prong from the cable. If you must use an extension cable, please use a 3-wire
cable with proper grounded plugs to prevent.
Connect to Ground
Please connect to the groung via the PE (Protecting Earth) Cable of the AC power supply as shown at the following figure. Make
sure the PE cable in the electrical outlet is well grounded in advance. Use only approved for use in your country. Do not attempt to
connect the power to the system until it is properly grounded to the rack cabinet frame. A serious hazard can occur if this
step is not properly completed.