Vacmaster PRO110 User Manual - page 2
Features of Your
VAC
MASTER
®
PRO
110
Gasket
Seal Pad
Accessory Port
Control Panel
Vac & Seal Button
Seal Button
Accessory Button
Extended Seal Time Button
Cancel Button
Seal Bar
Lid Locks
Power Indicator Light
Light illuminates when the unit is
turned on or in use.
Vac & Seal Button
Press for hands-free automatic vacuum
packaging. This button is only used for
vacuum bags.
Seal Button
Used only to seal and make bags.
Accessory Button
Press to vacuum canisters. See the
“Vacuum Package with Canisters” section.
Extended Seal Time Button
Used to extend the seal time.
Cancel Button
Use to cancel all processes immediately.
Vacuum Packaging with Canisters
Tips for Troubleshooting
If your machine will not turn on, ensure the machine is properly plugged into a grounded
outlet. Check the power cord for tears or frays.
If you are not achieving a complete vacuum:
• Ensure the open end of the bag is across the gasket and within the vacuum chamber.
• Also, the bag must be laid flat across the seal bar. Wrinkles and bulges may result in an
insufficient seal.
• Inspect the seal. A successful seal will look clear. If the seal is spotty, incomplete, wrinkled,
white or milky, cut the seal and restart the sealing process.
• For best results, use
VAC
MASTER
®
bags, rolls and accessories.
If the vacuum is lost after sealing, check for small puncture holes in the bag, then cover any
sharp edges with a
VAC
MASTER
®
Bone Guard Sheet, and vacuum package in a new bag.
If your canister will not properly vacuum:
• Ensure that the accessory hose is inserted into the lid.
• Ensure that the canister lid is set to the “Vacuum” setting.
• Check the canister for cracks or damage.
• Always leave at least 1 inch of head space between the contents and the rim of the canister.
1
2
3
4
To open the canister, twist the knob to the
“Open” position.
1
2
3
4
5
6
7
Read this manual carefully before using your PRO110 for the first time.
Vacuum packaging is not a substitute for canning. Any perishable foods that
require refrigeration or freezing must still be refrigerated or frozen after packaging.
Use only
VAC
MASTER
®
vacuum bags, rolls, accessories, and attachments.
Do not use the PRO110 on a wet or hot surface or near a heat source.
Do not immerse machine or power cord in any liquid.
Use only grounded power sources. Do not use with an extension cord.
Do not operate appliance with a damaged cord.
The PRO110 should only be used for its intended purposes.
Unplug machine before cleaning your PRO110. Use a clean damp cloth and mild soap.
Never vacuum package garlic or fungi, such as mushrooms. A dangerous chemical reaction
takes place when the air is removed.
Some fruits and vegetables may release gases (out-gases). The vacuum may be lost when
packaging these fruits and vegetables. Blanching or freezing before vacuum packaging
helps prevent this.
Delicate foods can be frozen prior to packaging to help them hold their shape.
If packaging fresh meats without pre-freezing, place a folded paper towel between
the meat and the top of the bag to help absorb the moisture.
To vacuum liquids, pre-freeze in a dish or an ice cube tray.
A
VAC
MASTER
®
Bone Guard Sheet can be used to cover sharp edges to
prevent bag punctures.
VAC
MASTER
®
vacuum bags are boilable, freezable and microwavable.
Only use canisters designed for vacuum packaging. Other containers may implode
under pressure.
Allow foods and liquids to cool prior to vacuum packaging.
Hand wash canister lids. Do not put in dishwasher. The canister itself is dishwasher safe.
Tips for Successful Vacuum Packaging
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Control Panel
Place items to be packaged in canister.
Make sure lid of canister is dry and free of
food particles and debris. Do not overfill.
Place lid on top of canister (lid sits on rim
of canister until vacuum process begins.)
Turn knob so arrow points to “vacuum”.
Attach accessory hose to port on
canister lid and attach opposite end
of the hose to accessory port on the
machine.
Close lid on PRO110, pressing firmly on
both corners to lock lid in place.
Press “Accessory” button, while slightly
pressing down on the canister lid for 3-5
seconds to start the vacuum cycle.
When the vacuum process is complete,
turn knob to the “lock” position and
remove the hose from canister lid. Store
canister in refrigerator. DO NOT FREEZE.