1. DL manuals
  2. Vacmaster
  3. Vacuum Cleaner
  4. VWM510
  5. Operator's Manual

Vacmaster VWM510 Operator's Manual - Table of Contents

Manual is about: Wall Mountable Wet/Dry Vacuum

Summary of VWM510

  • Page 1

    Wet/dry vacuums operator’s manual wall mountable wet/dry vacuum model no. Vwm510 for your safety read and understand this manual before use keep this manual for future reference vw01bz.20.60.01 www.Vacmaster.Com cleva north america 44 parkway commons, greer, sc 29650

  • Page 2: Table of Contents

    2 section page thank you for purchasing this vacmaster® wet/dry vacuum cleaner. Feel confident that with vacmaster® you are obtaining a high quality product engineered for optimal performance. This vacuum is capable of picking up liquids and dry materials. For your safety: carefully read and underst...

  • Page 3: For Future Reference.

    3 important safety instructions read and understand all instructions before using this vacuum read and understand this owner’s manual and all labels on the wet/dry vacuum cleaner before operating. Safety is a combination of common sense, staying alert and knowing how your vacuum works. Use this wet/...

  • Page 4: Warning:

    4 this wet/dry vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for servicing double-insulated wet/dry vacs before servicing. Use this wet/dry vac as described in this manual. Observe the following warnings th...

  • Page 5

    5 unpacking and checking carton contents qty 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 3 1 key description………………... A vac assembly…………....... B hose holding rod ……….. C mounting rack ……………. D 11-foot hose………………. E 10-foot flex hose………… f floor / squeegee nozzle …. G crevice tool ………………. H round dusting brush ...

  • Page 6: Warning:

    6 warning: do not plug in power cord to power outlet, make sure plug is disconnected before assembling the wet/dry vac unpacking your wet/dry vacuum & general assembly 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Undo the latches. (fig. 2) 3. Lift the power head off of ...

  • Page 7

    7 • do not hang from or sit on the mounting rack • do not exceed 40 pounds of maximum weight limit. 6. Insert the hose holding rod into the two holes located on the top of the mounting rack. Make sure the bend of the rod is directed away from the wall. (fig. 6) 7. Select a location on a wall stud th...

  • Page 8: Warning:

    8 dry vacuuming warning: be sure to read, understand, and apply information, entitled ‘safety instructions & warnings’. Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the air. Flammable gases or vapors include but are not limited to; lighter fluid, solvent type cleaners, ...

  • Page 9: Warning:

    9 liquid vacuuming warning: be sure to read, understand, and apply information, entitled ‘safety instructions & warnings’. Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the air. Flammable gases or vapors include but are not limited to; lighter fluid, solvent type cleaner...

  • Page 10: Warning:

    10 remember! The foam filter must be removed after wet vacuuming, and a cartridge filter must be installed before dry vacuuming again. This wet/dry vac has blowing capabilities. To use the blower feature follow the instructions listed. Warning: always wear safety goggles complying with ansi z87.1 (o...

  • Page 11: Warning:

    11 important! Clean or change the cartridge filter regularly for best performance. Always use cartridge filter for dry vacuuming. If the machine is used with out the cartridge filter, the motor will burn out and the warranty will be voided. Always keep spare filters on-hand. Notice! The filters incl...

  • Page 12: Resetting The Remote Control

    12 installing foam sleeve filter 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Remove power head and place in upside down position. Follow instructions to remove cloth filter. 3. Carefully slide foam sleeve filter down over the filter cage making sure the whole cage is c...

  • Page 13: Troubleshooting

    13 4. Lift the foam cover to expose the battery and remove the old battery. (fig. 5) 5. Insert the new battery with the terminals in the direction shown and make sure to replace the foam cover. (fig. 6 & 7) 6. Replace the remote control by aligning the white triangle on the side cover to the unlock ...

  • Page 14

    14 exploded view and parts list.