Summary of 1000TVL -P
Page 1
1000tvl vacron-p color camera 2013. V1.0 user manual.
Page 2
1000tvl vacron-p camera i index a. Features ...................................................................................................................... 1 b. Specifications ................................................................................................................... 2...
Page 3: A. Features
1 a. Features 1/3” ccd high solution optics double frequency wdr color camera high resolution color 1000tvl 2d/3d noise reduction (hdnr) optics double frequency wdr(128db) digital slow shutter from x2 up to x512 (max) adaptive backlight compensation function ( blc ) / anti-headlight (hlc) e-ptz (zoo...
Page 4: B. Specifications
1000tvl vacron-p camera 2 b. Specifications video system ntsc pal pick up element sony 1/3” ccd image sensor image signal process digital signal processor number of pixels 1020 (h) × 508 (v) 1024 (h) × 596 (v) picture elements approx. 520k approx. 610k horizontal resolution 1000 tvl synchronization ...
Page 5: C. Structure Of Product
1000tvl vacron-p camera 3 c. Structure of product box camera auto iris lens connector power indicator power input dc12v/ac24v osd operation set up / up / right / left / down video out.
Page 6: D. Osd Operation
1000tvl vacron-p camera 4 d. Osd operation ■ main menu ■osd setup setup: 1.Click one time to enter the main menu click twice ( to exit osd menu, reload fty , return to previous page, exit & save) up / down: selection. Left / right: enter & return. (1.1) ae mode setting (1.2) standard ae under standa...
Page 7
1000tvl vacron-p camera 5 (1.3) swdr auto switch: set to auto/on level: value 0~10 set the ratio of wdr. Small value will have more ratio for the outdoors; in the other hand, big value will have more ration for the indoors. Low lum brightness: value 0~40, the brightness in the dark area will depend ...
Page 8
1000tvl vacron-p camera 6 symbol will be shown on the upper left corner of live view. Normal back light compensation (1.5) hlc high light compensation set range: click right button to enter the menu, press setup button in order to set up next corner point. (in this area, any brighter light source wi...
Page 9
1000tvl vacron-p camera 7 (1.6) demist demist: set the level of demist. If set auto, the dsp will turn on/off the function and decide the level of demist (auto, low, middle, high). 3d-nr: on/off the 3d-nr function symbol will be shown on the upper left corner of live view normal demist activated (he...
Page 10: 2. Color Adjust
1000tvl vacron-p camera 8 2. Color adjust color adjust settings (2.1) white balance tracking mode 2-8.5k、tracking mode 2-10k (2.2) brightness 0~99 (2.3) color-red red (0~99) (2.4) color-green green (0~99) (2.5) color-blue blue (0~99) (2.6) contrast 0~99 (2.7) saturation 0~99 (2.8) cr suppress on/off.
Page 11: 3. Image Adjust
1000tvl vacron-p camera 9 3. Image adjust image adjust settings (3.1) day & night mode: auto-progressive like human eyes mode: b/w change to b/w mode color burst: on/off color burst.
Page 12
1000tvl vacron-p camera 10 mode: color change to color mode. Mode: ext for external control, the input pin is the pio 0 on the pcb board. I. Color burst on/off color burst ii. Ir input level set input level (high, low) to make it work! Iii. Smart ir set 0~6 to adjust the curve of brightness to preve...
Page 13
1000tvl vacron-p camera 11 mode: auto-general when reaching assigned brightness, change to bw. I. Color burst on/off color burst ii.Delay control delay time for changing day/night mode (0~255 ） iii. Day→night set the start point from color mode to bw mode. Day->night value must be greater than night...
Page 14: 4. Intelligent
1000tvl vacron-p camera 12 (3.3) 3d dnr (0~3), to reduce image noise dnr off： noisy 3d-dnr on/auto clearly (3.4) 2d dnr 0~32 (3.5) sharpen 0~7, the higher value, the stronger effects. (3.6) fc suppress 0~15, the higher value, the stronger effects. (3.7) blemish compensation set the effect of compens...
Page 15
1000tvl vacron-p camera 13 set area motion detection area set up ( click right button to set up / click to remove the area and exit). Sensitivity (-2~2), the higher number, the more sensitive. Warning trigger level: (high/low/off) an alarm outputs when a motion is detected. Default output port: pio2...
Page 16
1000tvl vacron-p camera 14 (4.3) privacy mask opacity (0~3), mask transparency setting. Mask select (1~8), select and set up the mask, maximum 8. Set mask range mask range set up (click right button to set up) switch on/off mask color (0~65535) , masks color setting symbol will be shown on the upper...
Page 17: E. System Setting
1000tvl vacron-p camera 15 e. System setting system setting (1.1) lens mode: to select lens type, dc in door/ dc outdoor/ manual. Brightness: only be activated with dc iris (-50~50). Aperture speed: only available for lens of dc iris (0-7) type: set lens type (0~2) (1.2) rs485 set up camera id: pepc...
Page 18
1000tvl vacron-p camera 16 f. Attachment a: utc controller installation.
Page 19
Fuho technology co., ltd no. 30, lane 726, jinma rd, sec. 3, chang hua city, taiwan. Tel:886-4-751-2881 fax:886-4-751-5860 made in taiwan http://www.Vacron.Com.