- DL manuals
- Vacron
- Security Camera
- 1000TVL -P
- User Manual
Vacron 1000TVL -P User Manual - page 9
1000TVL VACRON-P Camera
7
(1.6) Demist
Demist: Set the level of Demist. If set Auto, the DSP will turn
on/off the function and decide the level of demist (Auto, Low,
Middle, High).
3D-NR: On/Off the 3D-NR function
Symbol
will be shown on the upper left corner of Live view
Normal
Demist activated
(Heavy Fog) Demist Off
(Middle Fog) Demist Off
(LIght Fog) Demist Off
Summary of 1000TVL -P
Page 1
1000tvl vacron-p color camera 2013. V1.0 user manual.
Page 2
1000tvl vacron-p camera i index a. Features ...................................................................................................................... 1 b. Specifications ................................................................................................................... 2...
Page 3: A. Features
1 a. Features 1/3” ccd high solution optics double frequency wdr color camera high resolution color 1000tvl 2d/3d noise reduction (hdnr) optics double frequency wdr(128db) digital slow shutter from x2 up to x512 (max) adaptive backlight compensation function ( blc ) / anti-headlight (hlc) e-ptz (zoo...
Page 4: B. Specifications
1000tvl vacron-p camera 2 b. Specifications video system ntsc pal pick up element sony 1/3” ccd image sensor image signal process digital signal processor number of pixels 1020 (h) × 508 (v) 1024 (h) × 596 (v) picture elements approx. 520k approx. 610k horizontal resolution 1000 tvl synchronization ...
Page 5: C. Structure Of Product
1000tvl vacron-p camera 3 c. Structure of product box camera auto iris lens connector power indicator power input dc12v/ac24v osd operation set up / up / right / left / down video out.
Page 6: D. Osd Operation
1000tvl vacron-p camera 4 d. Osd operation ■ main menu ■osd setup setup: 1.Click one time to enter the main menu click twice ( to exit osd menu, reload fty , return to previous page, exit & save) up / down: selection. Left / right: enter & return. (1.1) ae mode setting (1.2) standard ae under standa...
Page 7
1000tvl vacron-p camera 5 (1.3) swdr auto switch: set to auto/on level: value 0~10 set the ratio of wdr. Small value will have more ratio for the outdoors; in the other hand, big value will have more ration for the indoors. Low lum brightness: value 0~40, the brightness in the dark area will depend ...
Page 8
1000tvl vacron-p camera 6 symbol will be shown on the upper left corner of live view. Normal back light compensation (1.5) hlc high light compensation set range: click right button to enter the menu, press setup button in order to set up next corner point. (in this area, any brighter light source wi...
Page 9
1000tvl vacron-p camera 7 (1.6) demist demist: set the level of demist. If set auto, the dsp will turn on/off the function and decide the level of demist (auto, low, middle, high). 3d-nr: on/off the 3d-nr function symbol will be shown on the upper left corner of live view normal demist activated (he...
Page 10: 2. Color Adjust
1000tvl vacron-p camera 8 2. Color adjust color adjust settings (2.1) white balance tracking mode 2-8.5k、tracking mode 2-10k (2.2) brightness 0~99 (2.3) color-red red (0~99) (2.4) color-green green (0~99) (2.5) color-blue blue (0~99) (2.6) contrast 0~99 (2.7) saturation 0~99 (2.8) cr suppress on/off.
Page 11: 3. Image Adjust
1000tvl vacron-p camera 9 3. Image adjust image adjust settings (3.1) day & night mode: auto-progressive like human eyes mode: b/w change to b/w mode color burst: on/off color burst.
Page 12
1000tvl vacron-p camera 10 mode: color change to color mode. Mode: ext for external control, the input pin is the pio 0 on the pcb board. I. Color burst on/off color burst ii. Ir input level set input level (high, low) to make it work! Iii. Smart ir set 0~6 to adjust the curve of brightness to preve...
Page 13
1000tvl vacron-p camera 11 mode: auto-general when reaching assigned brightness, change to bw. I. Color burst on/off color burst ii.Delay control delay time for changing day/night mode (0~255 ) iii. Day→night set the start point from color mode to bw mode. Day->night value must be greater than night...
Page 14: 4. Intelligent
1000tvl vacron-p camera 12 (3.3) 3d dnr (0~3), to reduce image noise dnr off: noisy 3d-dnr on/auto clearly (3.4) 2d dnr 0~32 (3.5) sharpen 0~7, the higher value, the stronger effects. (3.6) fc suppress 0~15, the higher value, the stronger effects. (3.7) blemish compensation set the effect of compens...
Page 15
1000tvl vacron-p camera 13 set area motion detection area set up ( click right button to set up / click to remove the area and exit). Sensitivity (-2~2), the higher number, the more sensitive. Warning trigger level: (high/low/off) an alarm outputs when a motion is detected. Default output port: pio2...
Page 16
1000tvl vacron-p camera 14 (4.3) privacy mask opacity (0~3), mask transparency setting. Mask select (1~8), select and set up the mask, maximum 8. Set mask range mask range set up (click right button to set up) switch on/off mask color (0~65535) , masks color setting symbol will be shown on the upper...
Page 17: E. System Setting
1000tvl vacron-p camera 15 e. System setting system setting (1.1) lens mode: to select lens type, dc in door/ dc outdoor/ manual. Brightness: only be activated with dc iris (-50~50). Aperture speed: only available for lens of dc iris (0-7) type: set lens type (0~2) (1.2) rs485 set up camera id: pepc...
Page 18
1000tvl vacron-p camera 16 f. Attachment a: utc controller installation.
Page 19
Fuho technology co., ltd no. 30, lane 726, jinma rd, sec. 3, chang hua city, taiwan. Tel:886-4-751-2881 fax:886-4-751-5860 made in taiwan http://www.Vacron.Com.