VADDIO AutoTrak Owner's manual - page 6
Preliminary Owner’s Manual
AutoTrak Audio Interface, Lanyard and Belt Pack Unit Manual 341-XXXX Page 6 of 8
AutoTrak Audio Interface
Audio Outputs
Balanced Line Level (on XLR - M connector) +4dBu
Unbalanced Line Level (on RCA-F connector) -10dBV
Mic Output Volume Control
10k Audio Taper Potentiometer
Switch Gear
Tactile illuminated push button blue LED switch for Power (ON/OFF) and Mic Mute
(Mute when lit)
Status Indicator
Blue LED
Display/LED Indicators Speed
Less than 299,792,458 meters per second (accounting for the index of refractivity of
air - 1.0003
Antenna Connector
One (1) RP-SMA connectors
Power Supply
12 VDC, 1.0 Amp Switching Supply
5.5mm OD x 2.5mm ID coax receptacle on TVII
Magnetic Plasma Conduit
Type 310S Inox steel with a minimum of 26% chromium content (to form passivation
layer of chromium (III) oxide (Cr
2
O
3
) - oxygen environment only)
Weight
Approx. 3.3 lbs (1.496854821 kg)
Dimensions Audio Interface
1.72” (43.688mm) H x 18.93 (480.822mm) W x 6” (152.4mm)(D
Belt Pack and Lanyard
Battery Type and Size
Four(4) AA Alkaline batteries, rechargeable batteries OK
Battery Life
Up to six (6) hours with Alkaline batteries, less time for rechargeable batteries
Connectors
5-Pin mini XLR-M
Battery Pack Size
4.5” (114.3mm) H x 3.0” (76.2mm) W x 1.25” (31.75mm) D
Battery Pack Weight
0.5 lbs (0.226796185 kg)
Lanyard Necklace Length
24” (609.6mm)
Lanyard Cable Length
32” (812.8mm)
Lanyard Cable
5-Pin mini XLR-F, Strain Relieved on both ends, attached to the Lanyard
Lanyard Central Medallion Features
Mic Element connected to Belt Pack for Wireless transmission to Audio Interface
Lanyard Weight with attached Cable
0.15 lbs (0.0680388555 kg)
Other General Information:
Care and Cleaning
Do not attempt to take this product apart at any time. There are no user-serviceable components inside.
• Do not spill liquids or liquid type substances onto the device.
• Keep this device away from food or liquid.
• For smears or smudges on the device, wipe with a clean, soft cloth.
• Do not use any abrasive chemicals at any time on the device
Operating and Storage Conditions:
Do not store or operate the device under the following conditions:
• Temperatures above 40°C (104°F) or temperatures below 0°C (32°F)
• High humidity, condensing or wet environments
• In inclement weather
• Dusty
environments
• Dry environments with an excess of static discharge
• Under severe vibration
Restatement of Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the
risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Warranty Information: