Vaillant VA 10-020 MXNHI User Manual - page 18
17
Split Murales User Manual
EN
Fig. 7.21 Working method of the SLEEP function in COOL, DRY
mode.
Legend
T1 Configured temperature
to Start of the SLEEP function
In HEAT mode
The ambient temperature decreases 2ºC in relation to
the configured one to ensure that the temperature does
not rise excessively during the sleep hours.
- During the first operating hour of the SLEEP function,
the ambient temperature will drop 2ºC below the
configured temperature.
- Once an hour has elapsed, the temperature will drop
2ºC more.
- Once three hours have elapsed, the temperature will
rise 1ºC.
- The unit will be operational for a further three hours
before stopping.
Fig. 7.22 Working method of the SLEEP function in HEAT mode.
Legend
T1 Configured temperature
to Start of the SLEEP function
In AUTO mode
The unit operates in the operating mode selected
automatically adapted to the corresponding SLEEP
modality.
In FAN mode
The unit does not have SLEEP function.
7.7.4 TIMER ON/OFF Function (CONNECTION/
DISCONNECTION USING TIMER)
The unit can be connected/disconnected using the timer.
Fig. 7.23 Selection of TIMER function.
Legend
1 TIMER button
2 TIMER ON/OFF function indicator
3 HOUR buttons (increase/decrease)
4 SET button
In order to activate:
• Select the desired operation mode (see section 7.5).
• Press the TIMER button.
The display configuration of the remote controller will
change.
Each time it is pressed, the timer modality will change
Timer ON/Timer OFF.
The "ON"/"OFF" indicators will light.
TIMER OFF
TIMER ON
TIMER ON-OFF
BLANK
Fig. 7.24 Remote controller display configuration.
Operating Instructions 7