1. DL manuals
  2. Vaillant
  3. Thermostat
  4. VRT 360f Operating and
  5. Operating And Installation Manual

Vaillant VRT 360f Operating and Operating And Installation Manual

Other manuals for VRT 360f Operating and: Quick User Manual
Manual is about: Room temperature thermostat

Summary of VRT 360f Operating and

  • Page 1

    For the owner and heating engineer vrt 360f operating and installation manual vrt 360f room temperature thermostat gb.

  • Page 2: Inhaltsverzeichnis

    2 contents operating and installation manual vrt 360f inhaltsverzeichnis notes on the documentation . . . . . . 4 storage of the documents .................... 4 symbols used ........................................... 4 safety . . . . . . . . . . . . . . . . . . . . . . . . . 5 operating manual . ....

  • Page 3

    3 operating and installation manual vrt 360f contents gb installation instructions . . . . . . . . . . 27 7 notes on the installation and operation . . . . . . . . . . . . . . . . . . . 27 7.1 ce label ............................................. 27 7.2 intended use ...................................

  • Page 4: Notes On The Documentation

    4 operating and installation manual vrt 360f notes on the documentation the following information is intended to help you throughout the entire documentation. Other documents apply in combination with this installation and operation manual. We accept no liability for any damage caused by failure to ...

  • Page 5: Safety

    5 gb operating and installation manual vrt 360f note! Useful information and instructions. • symbol for a necessary task safety the room temperature thermostat must be installed by a suitably qualified heating engineer, who is responsible for adhering to the existing standards and regulations. We ac...

  • Page 6: Operating Manual

    6 operating manual vrt 360f operating manual 1 overview of the equipment 1 2 abb. 1.1 overview of equipment key 1 display 2 dial (turn and click) i info button f special functions button p programming key/installer level 1 overview of the device.

  • Page 7: Overview Of The Display

    7 gb operating manual vrt 360f 2 overview of the display 1 2 3 4 5 6 7 8 9 11 10 fig. 2.1 overview of the display key 1 installer level and service/diagnosis level (chapter 11.1) 2 info level (see 4.7) 3 hot water symbol 4 circulation pump symbol 5 heating circuit symbol 6 time/temperature display 7...

  • Page 8: Description Of The

    8 operating manual vrt 360f 3 description of the appliance the vrt 360f is a programmable room temperature thermostat with weekly programme for heating, hot water and circulation pump for connection to vaillant heating equipment with ebus. The connection between the room temperature thermostat and t...

  • Page 9

    9 gb operating manual vrt 360f 4.1 setting the operating modes table 4.1 provides you with an overview of the operating modes you can select. The selected operating mode affects the timer programmes both for heating and for hot water and the circulation pump. • when the room temperature thermostat i...

  • Page 10

    10 operating manual vrt 360f symbol meaning heating hot water automatic: the operation of the heating circuit changes between the operation modes heating and energy saving . The heating circuit symbol is displayed if a heating requirement is detected. The operation of the hot water storage cylinder/...

  • Page 11

    11 gb operating manual vrt 360f symbol meaning heating hot water off: the heating circuit is off, provided that the frost protection function (if the room temperature is below 5°c) is not activated. If the frost protection function is activated, the heating circuit symbol is displayed. The boiler is...

  • Page 12

    12 operating manual vrt 360f 4.2 setting the current day and time to set the current time and day of the week with the display in normal mode, you must perform the following steps: • press the dial until a day of the week starts flashing. • turn the dial until you see the current day of the week. Mo...

  • Page 13

    13 gb operating manual vrt 360f 4.3 setting timer programmes the room temperature thermostat is equipped with a basic program (see table 4.2). Time window current day / block of days start time end time h1 m0 - fr 6:00 22:00 h2 — — — h3 — — — h1 sa 7:30 23:30 h2 — — — h3 — — — h1 su 7:30 22:00 h2 — ...

  • Page 14

    14 operating manual vrt 360f you can define three time windows for each day. When you press the p button the display returns to basic mode. The table below illustrates the individual steps again, using the example of the hot water timer programme. If you want to change the timer programme for heatin...

  • Page 15

    15 gb operating manual vrt 360f display required steps press the dial. The cursor marks the week block display, which also flashes. Select a block programme or a single day of the week by turning the dial. Settings: mo - su mo - fr sa - su mo = monday tu = tuesday we = wednesday th = thursday fr = f...

  • Page 16

    16 operating manual vrt 360f if necessary, you can switch the room temperature thermostat from the week programme to a daily programme. • with the display in normal mode, press the f button for about 10 seconds. When you programme time windows, days of the week will no longer be displayed. 4.4 setti...

  • Page 17

    17 gb operating manual vrt 360f • you can set the required room temperature directly (after about 1 second) to the desired value by turning the dial. The display switches back to normal mode after five seconds. Setting the room temperature for time windows (only possible if the "temperature level" f...

  • Page 18

    18 operating manual vrt 360f • turn the dial until you see the room temperature you want for the time window h3. The new room temperature is assigned to all time windows with h3. The display switches back to normal mode after five seconds. Setting the set-back temperature "eco“ • push the dial until...

  • Page 19

    19 gb operating manual vrt 360f 4.6 activating special functions you can access the special functions using the f button. You can activate the following functions: display required steps quick veto the quick veto function allows you to adjust the room temperature for a short time (until the next tim...

  • Page 20

    20 operating manual vrt 360f display required steps energy-saving function the energy-saving function lets you lower the heating for an adjustable period regardless of the set heating programme. Press the special function button twice and the energy- saving symbol appears on the display. You will al...

  • Page 21

    21 gb operating manual vrt 360f display required steps once-only cylinder filling the once-only cylinder filling function allows you to fill the cylinder, regardless of the set timer programme. Press the special function button four times. The once-only cylinder filling symbol appears in the display...

  • Page 22

    22 operating manual vrt 360f display required steps ¬ holiday function holiday function if you want to deactivate the function before, just press the f button. If the anti-legionnaire's disease function is activated, it is performed on the last day of the holiday. Table 4.4 special functions 4.7 inf...

  • Page 23

    23 gb operating manual vrt 360f - the day/month/year (if the calendar is activated) - the timer programmes set for heating (every single time window per day) - the timer programmes set for hot water (every single time window per day) - the timer programmes set for the circulation pump (every single ...

  • Page 24

    24 operating manual vrt 360f fig. 4.1 releasing the locking hook • the batteries can now be changed (2x aaa-lr03; fig. 4.2). Make sure that the polarity of the batteries is correct. Fig. 4.2 changing the batteries if the batteries are not changed in time, the regulator switches over to operating mod...

  • Page 25: 5 Manufacturer’S

    25 gb operating manual vrt 360f 5 manufacturer’s warranty and liability vaillant warranty we only grant a vaillant manufacturers warranty if a suitably qualified engineer has installed the system in accordance with vaillant instructions. The system owner will be granted a warranty in accordance with...

  • Page 26

    26 operating manual vrt 360f packaging please leave the disposal of the transport packaging to the qualified servicing company which installed the appliance. 6 recycling and disposal.

  • Page 27: Installation Instructions

    27 gb installation instructions vrt 360f installation instructions 7 notes on the installation and operation the assembly, electrical connection and the settings in the device as well as the commissioning must be carried out only by a suitably qualified heating engineer. Check the site of installati...

  • Page 28

    28 installation instructions vrt 360f 7.2 intended use the valliant room temperature thermostats vrt 360f are state-of-the- art appliances which are designed in accordance with approved safety regulations. Nevertheless, there is still a risk of injury or death to the user or others or of damage to t...

  • Page 29: Safety Instructions and

    29 gb installation instructions vrt 360f 8 safety instructions and regulations the unit must be installed by a suitably qualified heating engineer, who is responsible for adhering to the existing standards and regulations. We accept no liability for any damage caused by failure to observe these inst...

  • Page 30

    30 installation instructions vrt 360f 8.2 regulations use standard commercial cables for wiring. - minimum cross-section of the wires: 0.75 mm 2 do not exceed following maximum wire lengths: - bus lines: 300 m connection lines at 230 v and bus wires must be laid separately when longer than 10 m. The...

  • Page 31: 9 Installation

    31 gb installation instructions vrt 360f 9 installation 9.1 place of installation the room temperature thermostat must be installed to ensure that it can properly record the room temperature (away from heat traps, not mounted on cold walls etc.). The best place for installation is usually in the mai...

  • Page 32

    32 installation instructions vrt 360f fig. 9.1 connection to one boiler install the receiver outside the heating unit using the plinth supplied (fig. 9.1) • pull the receiver ( 1 ) off the wall plinth ( 2 ). • drill two holes ( 3 ) of 6 mm diameter (as shown in fig. 9.2) and put in the supplied wall...

  • Page 33

    33 gb installation instructions vrt 360f 1 1 3 2 2 4 5 fig. 9.2 mounting the receiver 9.3 mounting the room temperature thermostat check the site of installation before fitting the unit with regard to possible radio interference by electrical equipment or building influences which may affect the fun...

  • Page 34

    34 installation instructions vrt 360f • insert the batteries supplied into the battery compartment at the back of the regulator (fig. 9.3, item 4 ). Make sure that the polarity of the batteries is correct. Connect the connection cable as per chapter 10. • push the room temperature thermostat onto th...

  • Page 35: 10 Electrical

    35 gb installation instructions vrt 360f 10 electrical installation the electrical connection may only be carried out by a suitably qualified heating engineer. Danger! Risk of fatal electric shock from touching live connections. Before carrying out work on the controller, switch off the power supply...

  • Page 36: 11 Start-Up

    36 installation instructions vrt 360f receptor vrt 360f boiler fig. 10.1 electrical connection 11 start-up certain system parameters have to be set in order for them to comply with the prevailing conditions. These system parameters are all together on one operating level and should only be set by th...

  • Page 37

    37 gb installation instructions vrt 360f the receiver is equipped with two status leds. In order to see these you must remove the cover of the receiver housing. The leds provide the following information for the system: led condition function green on off operation ok operation fault red off on flas...

  • Page 38

    38 installation instructions vrt 360f display set by turning the dial set-back temperature factory setting: 15 °c setting range: 5 ... 30° c set hot water temperature factory setting: 60 °c setting range 35 ... 70 °c correction of current room temperature adjustment of the displayed value by up to m...

  • Page 39

    39 gb installation instructions vrt 360f display set by turning the dial two-point/analogue operation 2-point/analogue mode change-over. The room temperature thermostat is set in the factory as a 2-point regulation system (set value 0). You can set it to analogue mode by changing the parameter to 1....

  • Page 40

    40 installation instructions vrt 360f display set by turning the dial day setting for activation of the calendar month setting for activation of the calendar year setting for activation of the calendar display set by turning the dial temperature level activate the setting for different temperatures ...

  • Page 41

    41 gb installation instructions vrt 360f display set by turning the dial temperature level time window h2 (only when temperature levels are activated) temperature level time window h3 (only when temperature levels are activated) table 11.2 system parameters 11.2 service/diagnostics level access the ...

  • Page 42

    42 installation instructions vrt 360f dial test test procedure press and push p button for approx. 3 seconds. Heating request a heating request of 50°c is simulated. The burner on the boiler starts up and the pump starts (only up to the maximum supply temperature of the boiler). Turn circulation pum...

  • Page 43

    43 gb installation instructions vrt 360f restoring the default settings • to return the room temperature thermostat to its default settings, press the p button for 15 seconds. As soon as the display lights up twice, the room temperature thermostat has been reset. This means that you will have to per...

  • Page 44: 12 Troubleshooting

    44 installation instructions vrt 360f 12 troubleshooting the room temperature thermostat signals the following fault conditions: fault signal meaning troubleshooting rf err no radio connection to the radio receiver on the heating unit check the site of installation. Batt low battery condition, repla...

  • Page 45: 13 Technical

    45 gb installation instructions vrt 360f 13 technical data description unit sender receiver operating voltage v 3v (2xaaa) 24 maximum permissible ambient temperature °c 50 50 battery working life months approx. 18 transmission frequency mhz 868,35 868,35 transmission capacity mw 0,5 current consumpt...

  • Page 46: 14 Vaillant

    46 installation instructions vrt 360f 14 vaillant service vaillant service to ensure regular servicing, it is strongly recommended that arrangements are made for a maintenance agreement. Please contact vaillant service solutions (0870 6060 777) for further details. 14 vaillant service.

  • Page 48

    83 8 5 71_00 gb 0 7 2 006 vaillant ltd vaillant house medway city estate trident close rochester kent me2 4ez telephone 01634 292300 fax 01634 290166 www.Vaillant.Co.Uk info@vaillant.Co.Uk.