Vaillant VRT 360f Operating and Quick User Manual

Vaillant VRT360f quick user guide for end users 

Operating modes 

Timed - heating will operate to the programmed ON and OFF periods. 

Constant - heating will operate continuously irrespective of programmed times. 

Setback - heating is operating at the “ECO” temperature 

OFF 

- 

heating is permanently off  

Note: The above symbols could be shown together e.g 

indicates heating is timed and 

ON. 

Setting the operating mode 

From the basic screen press the “Click and Turn” knob one click, one of the operating mode 

symbols will flash. Whilst the symbol is flashing rotate the knob to select the desired operating 

mode. The operating mode is set and the symbol will stop flashing after 5 seconds. 

Setting the target room temperature 

From the basic screen rotate the “Click and Turn” knob 1 one click clockwise. The current target 

temperature is shown flashing. To adjust the target temperature rotate the knob clockwise to 

the new desired target temperature, the display will return to the basic screen in approx 5 

seconds. 

Override function 

From the basic display push the “F” button once. The 

symbol is displayed together with a 

flashing temperature, rotate the knob to set the desired temperature for the override period. 

This mode will be active until the next time window. To turn off the override function simply 

press the “F” button, the display will revert back to the basic display after approximately 10 

seconds. 

Note: The time and date should have been set-up by your installer, if necessary refer to 

installation manual for details of how to set time & date 

Basic Display 

Main function “Click 

and Turn knob” 

“Program” 

button 

Current room 

temp 

Operating mode 

“Function” 

button