Vaillant VRT 360f Operating and Quick User Manual - page 2
Vaillant VRT360f quick user guide for end users
Setting programming periods
1. From basic display push “P” button once then release, screen below in fig 1.0 is shown with
flashing “radiator” symbol.
2. Push knob one click, “H1” flashes, rotate knob to select heating period 1, 2 or 3.
3. Push knob one click “Mo Tu We Th Fr Sa Su” flashes, leave to select all days of the week
with the same programming times or rotate knob to select group of days or individual days.
4. Push knob one click “06:” flashes. Rotate knob clockwise to select ON period hours.
5. Push knob one click “:00” flashes. Rotate knob clockwise to select ON period minutes.
6. Push knob one click “22:” flashes. Rotate knob clockwise to select OFF period hours
7. Push knob one click “:00” flashes. Rotate knob clockwise to select OFF period minutes
8. Repeat steps 2 to 7 for different day selections.
9. Push “P” to exit
The control is now set-up in its basic form. For more advanced
features / settings refer to installation manual.
Fig 1.0