Valkee Bright Light Headset User Manual - page 7
47
46
USING THE DEVICE
USING THE DEVICE
Adjustment of treatment settings
You can adjust the device’s treatment and voice settings via the online MyValkee
userinterface(http://www.valkee.com/myvalkee/).Theinstructionsforthe
interface can be found at the same address.
First,registerasauseroftheMyValkeeinterface.Whenyouloginforthefirst
time,theinterfaceinstallsthesoftwarerequiredonyourcomputer.Theinstallation
issafe.Yourfirewallprogrammayaskseparatelyaboutpermissiontoperformthe
installation.
Cleaning
Clean the earplugs after each use. Remove the silicone parts, and clean them
carefullywithadampclothorsoftpaper.
Handletheopticalfiberswithcare–theyareeasilydamaged.
Removing the device from use
Donotdisposeofthedevicewithhouseholdwaste.Thedeviceanditslithium-
ionbatterymustberecycled,orotherwisedisposedof,incompliancewiththe
regulations in force.
Do not open the device or disconnect the battery. If the battery comes loose or
isremoved,itmustnotbeopened,takenapart,ormodified.Ifthebatteryleaks,
avoidskinoreyecontactwiththeelectrolyte.Ifcontactnonethelessoccurs,
immediatelyrinseyourskinandeyeswithwaterandcontactadoctor.
Do not use a damaged battery. Keep the device and the battery out of the reach of
children.Keepthedeviceawayfromopenflames–thebatterycouldexplode.
Fault situations
Intheeventofafault,theorangeandgreenindicatorlightsflashsimultaneously
andthedevicebeepsseveraltimesordoesnotswitchonatall.
Intheeventofafault,resetthedevicebypressingthepowerbuttonandholding
it for approximately 30 seconds. If required, contact the manufacturer. The contact
information can be found on the back cover of the user manual.