Valor 530 B-Vent Installation & Operating Instructions Manual - Supply Gas
Other manuals for 530 B-Vent:
Installation Booklet
Manual is about: heater
of
9
5
Supply Gas
All appliances are supplied for installation with natural gas. The supply pressure must be between
the limits shown in section Ratings of this manual.
The supply connection is 3/8’’NPT.
The opening for the gas supply line is at the rear left corner of the appliance.
Pack Contents
#552BVK B-Vent Conversion Kit
1
B-vent adapter unit with vent switch
1
Thermocouple interrupter
1
Case rear cover plate
2
“P” clips (for wire fastening)
Take care when removing the contents from the packaging to prevent damage. Check that all the
contents are in the packs and are undamaged.
Note: The restrictor plates supplied with the 530 engine are NOT required for the B-vent
installation.
•
•
•